No loop flow

Mrnob

Mrnob

Mrnob

Associate
Joined
17 Nov 2011
Posts
336
Location
Birmingham
Hello yesterday i added 2 980s to my loop, i've been running a waterloop just for the cpu for around 1 and a half years. But since added the 2 gpus i cant seem to get any flow. I've tried different speed settings and shaking the case around and nothing. :(:mad:

a5g6fc.jpg
 
Last edited:
it did moved all around at first went putting the liquid in but it seems to have like a vacuum action
 
I've tried tipping the case in all directions but no success, i've ended up stripping the whole thing down.
 
Well theres water thats stuck up at the top left corner of the case around the gpu and cpu block area. Then the outlet of the pump which goes to the gpus has barely any liquid inside of it, and there is no movement in the reservoir.
 
On the instructions it said that i could use them either way. As im just trying to leak test nothing is heating up and there is no unusual noises.
 
Hi, ive just tested my old res i had lying around with the d5 attached with tubing from the inlet to the outlet and it is 100% working
 
Cheers for all the help guys, yea im guessing it was the trapped air. May have another attempt doing it by the weekend.
 
Just had a thought, how am i able to run my pump at full as it its a pwm version without the motherboard. ALso i can't use it on my fan controller.

Well i did have the pwn cable running to another comp, but if theres an easier way then that would be better
 
Last edited:
Rigth, redone my loop again and whatever i do i cant seem to get any futher its driving me insane
 
You must log in or register to reply here.
Back
Top Bottom