No output through cards

[wkingsnorth]

Hi, I've recently moved case and redone my loop, and now my graphics cards don't give any signal through their outputs, but the onboard works.
2600k
P8Z68-V Pro
16Gb ram
2x 2.5gb GTX 570s
Thanks

 

[WelshSniper]

Just a thought, Have you checked the BIOS settings, I know it sounds dumb but its worth a check, if its still not working try re-seating the cards and check the power to both cards

 

[wkingsnorth]

Well, I checked the bios but I couldn't find anything related to the enabling/disabling of discrete/onboard graphics. Also, I haven't changed anything there since I changed my case, and it worked before (same hardware apart from case/loop)

 

[WelshSniper]

So by changing case you, removed the PSU and put into new case, So the cables might have a kink/brake in them, or if you have to have some molex to PCIe adapters check them. Try re-seating ram and resetting the BIOS, Check each card in the Pc by its self and in both slots

Thats all I can think of

 

[wkingsnorth]

Right, new problem. It's leaking.

 

[Cleeecooo]

Also, once you've sorted rhe leaking, get the stock cooler and plug in one of the fans to see if the card is getting power.

 

[ltnmzh]

Hope the leak didn't fry your card...

 

[wkingsnorth]

Leak is fixed, loop is now bluer thanks to more dye
I got a display on the card for a moment, the post screen, then it went back to onboard. (Multiple monitors, one of them is running onboard until I sort this)

 

[wkingsnorth]

Nvidia control panel looks like this.
Getting output through the top card at the moment.

 

[Cleeecooo]

Try reinstalling the drivers. That's just weird