no signal detected

manius

manius

manius

Associate
Joined
7 Sep 2014
Posts
419
Location
Kent
hi all

my boys pc is having a few issues he is getting no signal detected when he turns on the pc
its been like it for a few months now some times it works some times it wont he was using a gtx 560ti that i took out when the problem started and he was using the onboard graphics but was still getting the same problem

i had a look today i i took out the battery to reset the cmos when i started it up it booted to bios so i set it to onboard graphics saved then it restarted and got the same no signal detected
any help would be great

cheers Nathan

Asrock H61 Pro Socket 1155
early i3 not sure what one
1x 8gb of ram
 
Sounds like a loose or faulty montitor cable, or if it's been janked about, it may have damaged the socket on either the monitor or pc.

New cable is the first thing, if it's a really cheap cable it just might not be a snug fit.
 
i was using a hdmi cable and had the problem so i tryed a vga cable and still have the problem i have tryed the pc on another monitor and had the same problem
 
When it works, does it work properly, ie, no screen artifacts or glitching?
I'm still thinking it's a bad cable or socket.

Can you try a different graphics card? Does the cpu/mobo have on-board graphics, if so, remove the graphics card and see if you have any joy using the onboard gpu, you may have to make sure it's enabled in BIOS.
 
it works fine when its on
when the issue first started i removed the gpu and have been on the onboard since with the same problem

i have tryed 2x hdmi and 1x vga so i have used the hdmi socket and the vga socket
 
You must log in or register to reply here.
Back
Top Bottom