• Notice regarding image hosts and attachments. See here.

Nvidia Driver Issues

Soldato
Joined
10 Aug 2010
Posts
5,508
Location
Somerset
The Nvidia driver on my families PC keeps crashing. It's very annoying! I recently reinstalled Windows 7, and it is the latest drivers. Any ideas!?

Spec:

FOXCONN Model M61PMV
AMD Athlon X2 240
2 GB RAM
NVIDIA GeForce 8400 GS

Windows say its driver version:
8.17.12.8562
 
Well, sometimes the screen goes black for a few seconds and windows says the driver crashed and it was recovered. Sometimes when the PC is turned on, Aero is disabled as it hasn't pick up the drivers or something.

No BSOD no error codes.
 
No, nothing to do with monitors installed. Got one plugged in via DVI and one via HDMI.
Only a few programs installed tbh, wanted to keep it simple for stability but I'm not getting that!
 
Sure, I forgot the HDMI is connected to our A/V receiver for a projector/TV. Would that have any affect? Most of the time its plugged in but not on.
 
Aero will need to be enabled if you want it, right click on the desktop and goto personalize then select an aero theme (near the top).

However - is the gpu fan cooled or a heatsink?

It is enabled. I'm on the PC now and it's on. But sometimes it starts up and is disabled (without being changed).

It has a small fan. I recently cleaned it all too, so its dust free.
 
Hmm, I knew HDMI could detect when it's connected, but the surely it should be able to cope with being disconnected/connected without crashing!?

I will try it without the HDMI at all and see if the issues continue. Thanks.
 
It's using less than 1GB atm, and a 100MB on that is Chrome tabs! I take your point, and would prefer more RAM, but why would that crash the display driver? It did it just now, when I had nothing more than Chrome running.

Problem is DDR2 RAM is quite expensive now and I don't have any spare :(
 
sounds like a possible hardware problem but try some more things

turn off or reduce acceleration if possible. Right click desktop, change resolution, advanced, troubleshoot, "change settings"... this might be greyed out though I am not sure about Nvidia drivers

reduce the colour depth to 16b instead of 32b if its set to 32

reduce your resolution, are you sure you are running the same resolution before you re-installed? are the two monitors the same order and the same orientation? left/right?

this problem only started when you re-installed right?

Yeah it did if I remember right, so it implies its software based.

That option is greyed out. Everything is exactly as it was before the reinstall, it was only because it had loads of crappy programs on here and I like to do it every year or so.

Like I said the HDMI is not in atm, so I'd be surprised if it was the monitors. I guess it could be the GPU or something.

What does reducing the colour depth do?
 
Is the GPU overclocked?
Have you tried uninstalling GPU drivers, then restarting and reinstalling them?
Have you tried removing the GPU and using the onboard GPU?

I don't think it's OC'd, unless it was factory OC'd.

I will try doing a fresh install of the drivers.
 
Thank you. Stupidly I'd not thought of reinstalling the drivers! I have done that. If I still have problems I'll come back for more help. Thanks all.
 
Back
Top Bottom