Associate
- Joined
- 10 Jan 2009
- Posts
- 854
- Location
- Now live in Scotland !
I bought 3 x dell 144hz G-Sync monitors .they all worked very well in surround 7680x1440p ..but had a lot of flickering on the center screen with all pixelatated boxes but worked all the same .
2 days later I switched the pc on to find that only the left monitor came on . It then took me best part of 3 hours trying to find out why and why the surround stopped working .trying many different things to deleting the graphics drivers and using just 1 Monitor. The main problem was when I actually could get the surround to work once I pressed apply on bezel correction the screen would go blank and stay blank but not go off into standby .
It was a nightmare trying to get even one of them to come back on never mind all 3 .
I have followed directions from the net .
I have 2 x 980ti in sli ..tried many different cables I've now managed to get 1 screen working .
2 of the monitors are going back to OC to be exchanged due to dead pixels and dirt in screen ..and I'm now thinking of forgetting the whole thing as its just a pain in the rear end ..I got so frustrated. .5 hours wasted on getting then to work ..After they worked from the beginning .
I don't what them to be exchanged and then not working again in surround . It was such a pain going from blank screens I just enabled the F8 from command prompt as windows 10 had it disabled so I enabled it and thus then could reset the screens to one screen only ..
If anybody has had this trouble then please give us some light as i do like the 3 screens in surround .
2 days later I switched the pc on to find that only the left monitor came on . It then took me best part of 3 hours trying to find out why and why the surround stopped working .trying many different things to deleting the graphics drivers and using just 1 Monitor. The main problem was when I actually could get the surround to work once I pressed apply on bezel correction the screen would go blank and stay blank but not go off into standby .
It was a nightmare trying to get even one of them to come back on never mind all 3 .
I have followed directions from the net .
I have 2 x 980ti in sli ..tried many different cables I've now managed to get 1 screen working .
2 of the monitors are going back to OC to be exchanged due to dead pixels and dirt in screen ..and I'm now thinking of forgetting the whole thing as its just a pain in the rear end ..I got so frustrated. .5 hours wasted on getting then to work ..After they worked from the beginning .
I don't what them to be exchanged and then not working again in surround . It was such a pain going from blank screens I just enabled the F8 from command prompt as windows 10 had it disabled so I enabled it and thus then could reset the screens to one screen only ..
If anybody has had this trouble then please give us some light as i do like the 3 screens in surround .