o/cing im starting to get confused

_-SIRUS-_

_-SIRUS-_

_-SIRUS-_

Associate
Joined
14 Jan 2003
Posts
429
Location
brean
last time i o/c it was with a axia
so this is quite new to me :rolleyes:
im aware this is just anuffer 1 of those threads but ive read so such
the last few days im starting to confuse myself

do this look ok or can i go much further on my o/c
what you think

Image1-3.jpg
 
Thats a ncie overclock - you could try and push it some more but watch the load temps. The ram is at 430 so watch how high that goes as it may get damaged.

Run Orthos to test the stabilitie (8 hours with out any fails is stable)

Any more info just say cous i have a v similar setup :)
 
thanks for the replie
ive ran sp2004 for over 24 hours and it seems fine
will try orthos tho thanks
load temps arent to bad when i run the fans seen highest hit 50c which i read is safe
 
That looks very good indeed. The chances are your RAM will hold you back before the CPU does - you don't say what RAM you're using, but if it's GeIL it usually falls over about 435-450.

SP2004 is the same as Orthos (if you run 2 copies) but if you only run 1 copy, it only test one core. It's still pretty heatening that you've got 24 hours of stable testing on this though. I'd definitely go for more!
 
his sig says 2gb OCZ so im thinking its the xtc 6400 stuff :) which can clock to around 500mhz i belive :D

which would give you 3.5ghz :|
 
yes i did run 2 copys of sp2004.so thats a good thing then .

question 4 you im running speed fan at the moment and its picking up on vcore 1 and vcore 2 the volts very quite a lot is this normal?
vcore 1 1.30
vcore 2 1.97

the ram is OCZ 2GB PC2-6400 Dual Channel Platinum Revision 2 XTC Series DDR2
would i be able to change the timeing to any thing better you think ?
or just try the fsb for a higher o/c
temp at mo is 45/41running orthos
thanks for the replies
 
Ok thats an excelent overclock running at those volts - leave the timings alone, maybe give it some more volts (ram) and up the FSB :)
 
very strange last post has vanished ?
any way my ram is OCZ 2GB PC2-6400 Dual Channel Platinum Revision 2 XTC Series DDR2
im gonna run orthos tonite just to see if its stable so 7 hours till i can check
im running at 3290 mhz cpu at mo. 470 on fsb temp at 37
i ran 2 versions of sp2004 and all went fine.
gonna leave it as this for tonight just to make sure

Image1-4.jpg
 
You must log in or register to reply here.
Back
Top Bottom