Associate
- Joined
- 13 May 2011
- Posts
- 349
- Location
- Essex
Updated the ob intel graphics drivers on my Asrock Z68 Extreme 4 & now the pc will not boot at all using the ob graphics output. When connected to my Radeon HD5850 Extreme it boots fine. If I then switch the dvi cable back to the o/b graphics it also works fine once booted.
How do I find out if the problem is related to the intel drivers/i5 2500k cpu graphics or the mb?
Also when running very randomly the pc crashes & upon re-boot forgets it has an Agility 3 60gb SSD installed as the o/s drive, if I leave the pc switched off for 15 minutes & re-boot I have to go into the bios & then re-select the SSD to boot from & it all works fine again until the next time.
I have cleaned the whole machine of dust ect including all the components as I am thinking this maybe an overheating problem.
The FC5 controller says temp around the in fans is approx 77f & 82f around the exhaust fans.
Any suggestions on what could be causing this? the mb, ssd or overheating.
How do I find out if the problem is related to the intel drivers/i5 2500k cpu graphics or the mb?
Also when running very randomly the pc crashes & upon re-boot forgets it has an Agility 3 60gb SSD installed as the o/s drive, if I leave the pc switched off for 15 minutes & re-boot I have to go into the bios & then re-select the SSD to boot from & it all works fine again until the next time.
I have cleaned the whole machine of dust ect including all the components as I am thinking this maybe an overheating problem.
The FC5 controller says temp around the in fans is approx 77f & 82f around the exhaust fans.
Any suggestions on what could be causing this? the mb, ssd or overheating.