OC look ok?!

SavellM · 26 Jan 2012 at 22:24

So I'm running a sever Xeon X5650 (2.66Ghz) OC'ed to 4Ghz in a Asus Sabertooth X58 mobo.
I have 6gb Corsair Dominator 1600mhz ram.
So I made my BCLK 200x20 and then ram runs 1600mhz too

I set Real Temp to TJ Max to 90 instead of default.

The test seen here ran for 3 hours, well just short.
On Prime95 I did In-Place large FFTs (Max Heat) for this test.

Seems to be good and stable enough?
Should I test it further or for longer?
If so what test and for how long?

SavellM · 27 Jan 2012 at 14:53

anyone?

Deception · 27 Jan 2012 at 14:59

Get Intel Burn Test going on maximum Stress, for 10-20 loops

SavellM · 27 Jan 2012 at 15:04

I read or heard somewhere that IBT was pretty strenuous so dont exceed 20 loops.
Should I just run 15 loops to be slightly on the safe side?

SavellM · 27 Jan 2012 at 15:05

And is that when you right click on start and chose the extreme stress thing?

Deception · 27 Jan 2012 at 15:40

Do 10 loops then, that should be fine. Change the 'stress level' to maximum (should be to the left of start).

SavellM · 27 Jan 2012 at 15:46

Ah ye, I see it.
What about the right click start extreme thing?
If it passes the 10 loops at max, should I try that?

Deception · 27 Jan 2012 at 16:19

SavellM said:
Ah ye, I see it.
What about the right click start extreme thing?
If it passes the 10 loops at max, should I try that?

You can if you want, but I never have. No harm I supposed in giving it a go.

SavellM · 27 Jan 2012 at 16:25

Awesome will do this when I get home.

Deception · 27 Jan 2012 at 16:39

Let us know how it goes