[OcUK Staff Builds] Project No-Name

NAM_killer

NAM_killer

NAM_killer

Associate
Joined
15 Jun 2009
Posts
595
My Antec 1200 just isnt cutting it any more so I've decided to upgrade my case to the obsidian which I will mod... Along with my entire water loop and PSU and I will also braid my PSU. (Long road ahead of me!)

I plan on getting:
- Bitspower Mosfet and NB/SB blocks for my P6T deluxe v2
- Swiftech Apogee XT for my [email protected]
- When GT300 comes out I'm gonna buy either the 360 or 380 but most likely the 380 and then slap a waterblock straight on that baby!
- Upgrade my 850W Galaxy to a Corsair HX850 and braid that with MDPC cable braid
- A quad rad to put in the top of my obsidian and a bitspower mesh radgrill (a great idea that I got from noeru doing it in his obsidian over at Xs)
- Noiseblocker 120mm silent fans (transparent blue blades with a black shroud)
- A Bitspower 250ml res

My build right now:
- [email protected]
- P6T deluxe v2 cross flashed to v1 BIOS 0006
- 6Gb G.Skill Trident @ 1678Mhz@6-7-7-20-1T
- EVGA GTX 260 Core 216 SSC @ 750/2580/1575 (will get gt300 and a waterblock later)
- Crucial 64Gb SSD (might get a 2nd one if they release firmware for trim in RAID)
- WD Black 640Gb
- Enermax Galaxy 850W (changing to a HX850 fully braided)

- Swiftech Apogee GTZ (changing to a Swiftech Apogee XT)
- Laing MCP655 vario (keeping)
- Masterkleer clear 7/16" tubing (changing to PrimoFlex Pro LRT Black Tubing 7/16")
- Thermochill triple 120mm rad (changing to Termochill quad)
- Feser double 120mm rad (keeping)
- Dangerden fatboy 1/2" barbs (keeping)
- EK multioption 100 (changing to Bitspower 250)


My PC right now (I know the cable management is a mess!!):
27122009142.jpg


I have taken the HDD racks out and am STILL waiting for the quad rad grill!
Which means I will have to wait even longer to cut the hole in the top of my case to fit my quad rad :(
P1010021.png

P1010016.png

P1010020.png

P1010018.png


Cable braid arrived with a cool picture from Nils at MDPC :D
nils.png


I am going to be doing the 1st layer of my 24 pin and 8 pin with black braid/blue shrink and then the 2nd layer will be blue braid/black shrink for contrast. Hopefully when the cables fan out they will look good alternating black and blue
P1010015.png


This is currently how far I am with my 24 pin
P1010014.png


And my SATA cable
P1010013.png
 
My Bitspower blocks have arrived!! (29/12/2009)

All together with the boxes only just opened
blocks.png


NB/SB full cover (very difficult to take nice pics of!!!)
PC290141.png

PC290142.png

PC290143.png

PC290144.png


Mosfet #1
amos21.png

amos22.png

amos23.png


Mosfet #2
amos31.png

amos32.png

amos33.png
 
good skills NAM,

i have tought you well :D

your photography is excellent!

really liking the bitspower blocks and the braiding

looking forward to seeing you butcher that obsidian! *Revvs the Dremel* Muah ha har!
 
n1blo said:
Looks good, can't wait to see this fin.

Really like the Bitspower stuff :D
Click to expand...

chris__stoke said:
Loving this will be watching to the end :)
Click to expand...

rjkoneill said:
good skills NAM,

i have tought you well :D

your photography is excellent!

really liking the bitspower blocks and the braiding

looking forward to seeing you butcher that obsidian! *Revvs the Dremel* Muah ha har!
Click to expand...

Thanks for the replies guys! It's gonna be a fun build!

Thanks for the advice about the tri-pod rjk, that is the only reason that the photos look good!

Finished the 24-pin now so heres a sneak peek!
24pin2.png

24pin1.png
 
Sweet. Bitspower stuff actually rocks. You had better make a much better job of the cable management this time, no excuses in that case!
 
You must log in or register to reply here.
Back
Top Bottom