OCZ 8GB (4x2GB) PC2-6400C5 800MHz Quad Channel Platinum Low Latency XTC Series DDR2

[Harbz]

http://www.overclockers.co.uk/showproduct.php?prodid=MY-108-OC

Anyone using this in an Asus P5Q-E or any other board?

Whats the max speed you have obtained?
What voltage does it need?

Mine just arrived this morning and I'm currently running it at 800mhz (400 FSB) at 1.96V and its been ok after 1 hour of memtest.

The specs say to run this at 2.1V, not sure if 1.96V is safe.

 

[Harbz]

whats the max speed u have got out of it?

if it works at 1.96 surely its better to leave it there, less power, less heat?

 

[Harbz]

Why do people buy C5 6400 when C4 is cheap now?.. I've always been confused by this

because it was £87 off the MM, pretty good deal I thought

Anyway, i'm in a bit of a dilema, ocuk say 2.1v, website specs on ocz says 2.1v, the Ram's spd says 1.8v, and the ram works fine in memtest at 1.8v. I'm currently running it at 1.9v in my asus P5Q-E. is that safe for long term stability? No need to run at 2.1v if it works fine lower right?

 

[Harbz]

IMO OCZ should put the voltage as a range like 1.8v-2.1v rather than 2.1v....

http://www.ocztechnologyforum.com/forum/showthread.php?t=40963

Mine is running fine at 1000mhz at 1.8v, actual 1.79v.

Thanks Vimes, that link is great help.

What timings does it need for 1000mhz?

 

[Harbz]

Think I will just leave mine at 1.9V just being safe.