ocz pc2 5300 ram

bellaghy05 · 4 Feb 2007 at 14:19

hello there. have d3s with e6600 @ 3.0ghz. i have 2 gig of OCZ pc25300 ram. my fsb is set to 333 with multiplier at 9. can i up the fsb some more even though it will take my ram above the 667mhz.
system is stable @ present on the above settings

thanks bp

Cob · 4 Feb 2007 at 14:27

Yeah you should be able to. You can always loosen the timings and/or give the voltage a bump if you hit a wall.

vairo · 4 Feb 2007 at 15:52

bellghay share with us what u have reached i would love to know,since i got some problems to find stable performannce option for my OCZ PC5400 :/ ,what voltage ,what Mhz ,what timmings you use ,i would appreaciate it !

bellaghy05 · 5 Feb 2007 at 17:48

e6600 @ 3.15
fsb - 350 mhz
vcore - 1.36
ram voltage - +0.2 (2.0)
ram timings according to cpu-z - 5-6-6-17

using ds3 board with ocz ddr2 pc5300 ram. using stock cooler.
i have run orthos beta for 9 hours with no issues.
idle temp - 33
full load temp - 58-60

hope this helps

vairo · 6 Feb 2007 at 01:54

good results , i will check out mine stuff again ,when i have more time

, thank you !