Official Parvum Build Thread

snips86x · 13 Jan 2015 at 10:39

parvumsystems said:
We've actually had it a lot more than you'd expect. Including complaints about it being a pink panel. I think the mistake is made because the film is stuck down SUPER well to the 3mm.

We did originally remove it but then of course you are far more susceptible to scratching in transit.

haha - you should start charging people to answer that question - will fund your next project

Apem · 13 Jan 2015 at 16:48

parvumsystems said:
We've actually had it a lot more than you'd expect. Including complaints about it being a pink panel. I think the mistake is made because the film is stuck down SUPER well to the 3mm.

We did originally remove it but then of course you are far more susceptible to scratching in transit.

LOL how are these people breathing their brains can not be functioning.

jt_uk · 13 Jan 2015 at 18:08

LOL how are these people breathing their brains can not be functioning.

Hehe kwality

faze_2 · 13 Jan 2015 at 19:55

interested in getting one of these S2.0 cases just a quick question here if anyone can answer what is the maximum length PSU that can be fitted with out issues ?

parvumsystems · 14 Jan 2015 at 10:28

faze_2 said:
interested in getting one of these S2.0 cases just a quick question here if anyone can answer what is the maximum length PSU that can be fitted with out issues ?

Thanks for your interest. We welcome you to the Parvum club!

The PSU space tops out at about 240mm. However; the bigger the PSU, the less cable management space you'll have.

mods1965 · 15 Jan 2015 at 17:30

parvumsystems said:
Thanks for your interest. We welcome you to the Parvum club!

The PSU space tops out at about 240mm. However; the bigger the PSU, the less cable management space you'll have.

If you have a fully modular PSU and have the spare cash, I recommend custom cables. These can be made smaller then normal to give you even more space inside the case.

X3T · 15 Jan 2015 at 21:24

I'm getting an ITX Parvum case soon! I will post some photos here when it arrives

flame696 · 16 Jan 2015 at 22:20

Any chance you will be making a full atx case that would accommodate a couple of 360 rads, 3 to 4 GPUs?

snips86x · 22 Jan 2015 at 15:07

They're already working on it!

Divine Pain · 3 Feb 2015 at 12:39

Hey parvum owners!

Quick question, those with the 80mm fans at the rear, do they make much difference? And what are the noise like?

Divine Pain · 4 Feb 2015 at 13:22

No one with any input?

snips86x · 4 Feb 2015 at 13:52

Divine Pain said:
Hey parvum owners!

Quick question, those with the 80mm fans at the rear, do they make much difference? And what are the noise like?

Divine Pain said:
No one with any input?

Sorry, just seen this!

I'm using these and they're really quiet. My 120mm fans are far louder. These particular fans also shift a hell of a lot of air.

I've also got an 80mm Akasa behind the HDD which is linked to the other 2 80mm fans via PWM Y splitter, just as quiet.

Divine Pain · 4 Feb 2015 at 14:08

I will order these and try them out! Thanks for your input snips really appreciate it.

snips86x · 4 Feb 2015 at 14:13

Divine Pain said:
I will order these and try them out! Thanks for your input snips really appreciate it.

What board are you using? Do you have enough fan headers? Y-Splitters are dead cheap from the a well known rainforest.

parvumsystems · 4 Feb 2015 at 15:04

Sorry also just noticed this. We use 80mm in our builds because they look nice, but a pair of high quality 80mm will pull as much if not more air out of the case than a 120mm.. just depends how hard you want to run them!

The NB fans recommended we would say are the best 80mm we've used in any of our builds.

Please report back.

Divine Pain · 4 Feb 2015 at 15:09

I have the Asus Gene VII board, currently have my two top fans and front two running of PWM splitters and I happen to have another extra spare, which should be ok i think?

Coincidentally i have almost the exact same build as your parvum on air but i have a 295x2 mounted in there hence why i ask about the fans! Once ive sorted the fans out and wait for ocuk to get the cabels i need in stock then im done!

Thanks for the suggestion snips

EDIT:

parvumsystems said:
Sorry also just noticed this. We use 80mm in our builds because they look nice, but a pair of high quality 80mm will pull as much if not more air out of the case than a 120mm.. just depends how hard you want to run them!

The NB fans recommended we would say are the best 80mm we've used in any of our builds.

Please report back.

well thats that then. Im gonna put an order for them soon! Thanks all!

Swagger187 · 5 Feb 2015 at 22:26

Nice design these cases. Really does tempt me to get a build in one. Great builds guys

Apem · 6 Feb 2015 at 02:23

Parvum are you coming out with any filters for your cases??

colinmcr · 6 Feb 2015 at 03:56

If you go with a custom request how long on average does it take? Is the custom option for X1.0

snips86x · 6 Feb 2015 at 12:05

Apem said:
Parvum are you coming out with any filters for your cases??

It would appear I gave them a great idea for using DemciFlex (claim to fame

)filters between the panels. They've said in the past that it's something they're working so if nothing has changed, I think it's still in progress

**Official Parvum Build Thread**

Official Parvum Build Thread