Caporegime
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
*** Official Ryzen Owners Thread ***
- Thread starter Frozennova
- Start date
Nice try, except its an X370 - its a CH6 like it shows/says in the thread
Soldato
Why dont you read the other thread before making assumptions.
Associate
Hi Matt dude, are you using Ryzen Master or BIOS to OC?
What utility do people believe the temps shown in - theres hwinfo which shows 2-3 different ones - often 10c or more different, ryzen master (different again), asus mobo utility (different again) and probably others yet different again.
Associate
I am using Ryzen Master to check temps.
Soldato
This, the msi command center also gives me the same readings
Matt I saw your pics of your pc, did you fudge the h100i on to the cpu with the old corsair amd bracketH110i and it seems to do a good job. I replaced the stock fans with these, slightly less cooling power but a bit quieter and LEDS. http://www.corsair.com/en-gb/ml140-pro-led-red-140mm-premium-magnetic-levitation-fan
15 Minute Update
Caporegime
No mate according to the Corsair website H110i is compatible with socket AM4.
I thought you had the h100 v2
Sure, that would make sense given Ryzen is a SOC and the NB freq raises in parallel with the base RAM freq.
Permabanned
One hour RealBench Test.....
Caporegime
One hour RealBench Test.....
Very nice.
Currently working on a 4Ghz 30 minutes RealBench stable. Testing in 10 minute windows trying to lower my Vcore.
Currently @ 1.439v-1.464v Passed 10 minutes, will now lower further. Once i feel close to the lowest i will run for 30 minutes. Temps are not an issue.
Watch out for some of the voltage settings when overclocking. I found PL voltage up at 2.0v which seems a large increase from 1.8v.
One hour RealBench Test.....
Nice. What's rest of system specs if you don't mind me asking?
Caporegime
Lowering PL voltage back to stock seems to have helped stability of my system. I was crashing in Realbench immediately at 1.45v last night, today I'm passing 15 minutes at 1.394v-1.417v. Will lower voltage again.
Lowering PL voltage back to stock seems to have helped stability of my system. I was crashing in Realbench immediately at 1.45v last night, today I'm passing 15 minutes at 1.394v-1.417v. Will lower voltage again.
I need to find that setting and see what it's on. How are you viewing it?
Caporegime
It's in the bios. Once you start increasing CPU frequency the bios seems to start overclocking it. I've locked it at 1.8v dead on.
Currently testing 1.35v and so far so good.
EDIT
Downloading RealBench 2.44 as it seems im on 2.43.
Last edited:
Quick X62 question. Did it fit snug on this board (c6h) with no "mods". Mine is very loose. But Temps on stock seem buggedOne hour RealBench Test.....
but liquid temp 23 @ idle
Last edited:
All my previous testing was 2.44.
I am currently trying 2.43 to see where I get - still had the black screen, which is... reassuring?