Only MAJOR overclockers need apply - survey!

[russty]

Stable for general use and gaming (3dmark06 stable).

First core only stable for about 20mins under prime95. Second core happy for hours.

Voltage at 1.525V, temps 38C -> 49C idle to load.

Russty

 

[gurusan]

My 4400x2 at 2.97ghz, 1.5vcore. Going to go for 3+ghz daily once I get better cooling...really considering water

 

[celliott]

Athlon 64 4000+ SD 3.1GHz on Air. 10 Hours passed of Prime95 = Stable

This is on 1.36v set in bios, although Cpuz seems to give a higher reading.

Proof its on air?: Click for pic of my PC

 

[JamesM]

Athlon 64 4000+ SD 3.1GHz on Air. 10 Hours passed of Prime95 = Stable

This is on 1.36v set in bios, although Cpuz seems to give a higher reading.

Proof its on air?: Click for pic of my PC

These 4000 really are excellent chips

 

[wizardmaxx]

 

[wizardmaxx]

Couldn't leave 5Ghz untouched, still hideously slow even at this speed though.

What settings and setup u using Kesnel. Mine tops out at 4.1Ghz.

 

[Kesnel]

What settings and setup u using Kesnel. Mine tops out at 4.1Ghz.

Hi there, cooling is phase change and I also put quite a bit of voltage through the chip.

 

[techmonkey]

E6600 2.40GHz @ 3.33GHz
XMS2 PC6400C5 @ 925Mhz 5-5-5-15
http://valid.x86-secret.com/show_oc?id=125471

 

[ghgh]

1m 27s on my p4 1800-m laptop.

30.7s on a 3700+ @ 2.7ghz.

 

[Brwmogazos]

Come on lads we gotta update the P4 tables keep clocking

 

[SimonMaltby]

Conroe x6800 week 31
On air - Tuniq Tower

Suiside shot - cant bench at all 4.2ghz

Stable for benching shot 4.1Ghz

PS: I picked this chip up for a mere £375 full boxed sealed, brand new retail

 

[Bradmax57]

Conroe x6800 week 31
On air - Tuniq Tower

Suiside shot - cant bench at all 4.2ghz

Stable for benching shot 4.1Ghz

PS: I picked this chip up for a mere £375 full boxed sealed, brand new retail

where on earth from

 

[SimonMaltby]

where on earth from

Was an unwanted gift / prize that a mate got - he knew i would give it a good home and therefore gave me a cracking price woot

 

[n1Cola]

hi all

Just to post my first a64 Oc, i know it is crap comparing to conroe, but i was on budget, so picked 3700+ sandy from OcUK.

specs:
DFI Ultra-D
3700+ sandy KAB2E
XP-90c + papst 92
Corsair XMS 4400c2
7900GTO 705/810
Hiper R 580W
Audigy4 pro
Spin Point 300GB
Sonata

 

[Bradmax57]

little bit of tinkering with my p5b and e6600

 

[Steviegee]

Super stable config gives consistent Benchmarks and doesn't crash!

Use thes formulas to calculate your V-Core
Either Min V-Core = FSB(MHz) / 210 e.g. 300MHz / 210 = 1.4286V (1.4375), or
Final Intended CPU Clock (GHz) / 2.5 e.g. 3.6GHz / 2.5 = 1.4400V (1.4375)

Anyway they've worked for me so far. Happy Clocking Guys

 

[Phunky Phish]

That does not really work mate!
I run 380FSB with 1.45vcore stable. But according to your calcs I should be running 1.8vcore!!
and to get 3.6GHz you would need 3600/9=400FSB/210=1.9vcore!
Yet your other calc says 3.6/2.5=1.44vcore!!!!!

EDIT: Using 9x multi locked

Erm......??

 

[exo]

Thought I'd better upgrade as peeps were beating me to the chopper in BF2

Just to make the AMD64 peeps sick this cpu stock (1.8GHz) beats my 5th placed Opteron's SuperPI time by 1 Second

Not had this rig set up long so duno what I can get out of her yet, 3.648GHz so far. 3.5 for everyday use.

SuperPI 1MB 16s

E6300 Core 2 Duo SL9SA MALAY - 1 066/06 - L626A370 @ 3648.6MHz - 7x521 - 1.45v (X2 Prime stable)
TCase 50C Idle 56C Load
Asus P5B Deluxe - BIOS version 0711
Arctic Cooling - Freezer 7 Pro
2x1024MB G.Skill DDR2 HZ PC2-6400 @ 521MHz 1:1 - 5-5-5-15 - 2.1v
512MB MSI 7900GTO
2x Hitachi Deskstar T7K250 NCQ 250GB SATA-II
Seasonic M12-600 PSU
LIAN LI PC-7 Plus

 

[fatty1]

P5B Vmodded X6800 11 x 436

 

[FatRakoon]

Ah, clocking time is here again eh?

I have not had much time to do some serious clocking recently.

I have acheived the following speeds

XP1700 - 3019Mhz ( AND ON AIR BTW )
Abit NF7S - Corsair XMS 4400 Platinum RAM

Winchester 3200 - 3.0Ghz
MSI Neo2 - Again, corsair

Opteron 144 - 2664Mhz
MSI Neo2 - Corsair XMS4400 TwinX

x2-3800 - 2.5Ghz ( AW SHAME )
MSI Neo2 & MSI Neo4 - Samsung & OCZ

Currently working on Intels however...

P4 660 Prescot @ 4.3 ( And rising - just priming it for a few days first )
DS3 & Kingston

Conroe @ stock ( Not got good RAM for it yet )
DS3 & ValueRAM ( Oh no! )

Its pretty cold in my PC room, ( e.g P4 @ sub-50c ) so I will hopefully get round to re-building the good bits and get clocking up and sending screenies out in the next week or so, or at least CPUZ Validations anyway...