Optimal setup for TV / Soundbar

BDEE · 28 Jun 2022 at 00:27

Hi,

Need some help please to try and figure out the best way to set this up:

TV - LG OLED55B6V
Soundbar - LG SN7CY
Sky Glass Puck
Xbox Series X
Switch

I had the sound going through via ARC but the bar wants to keep defaulting to OPT and I can’t seem to get it to work on ARC.

However, thinking that I might not be getting the best sound output - the TV is not Atmos compatible, but I do have Atmos through sky glass and believe this should work via the puck if bypassing the TV for the initial input and then returning via arc?

Also at the moment to get sound out the switch I seem to have to have the sky puck turned on and it goes silent if that goes on standby.

So in order to get the best sound (Atmos ideally) and picture, what order should I be plugging things into each other?

Thanks!

BDEE · 28 Jun 2022 at 14:41

hornetstinger said:
Does the TV suppor e-arc?

No, just normal arc.

theone8181 said:
That's got a hdmi in and put. Why don't you plug the puck into the sojndbar, then use arc/earc for everything else?

So that will be HMDI in from the puck to the SB, then the HDMI out from the SB to the arc on the TV?

BDEE · 28 Jun 2022 at 20:54

theone8181 said:
Yea I think that's what I meant. Does the puck actually output atmos?

According to a number of posts on the Sky forums, the puck apparently does output Atmos - Which I was suprised about tbh.

I will have a play around and see. Only annoying thing is all my cables are hidden behind the plasterboard which I then sealed up. The one currently going into the SB isn't a high speed cable, so it may be a messy job re-doing it all. Think I will just give it a go "loose" first before embarking on opening the wall back up again!

BDEE · 2 Jul 2022 at 18:22

There is an input selector of "Dolby Digital Plus", which I believe is Atmos.

So I have 2.1 cables now going from the Puck into the sound bar HDMI in, then onward to the ARC HDMI socket of the TV.

All seemed OK - Getting throughput of picture and sound by selecting the sound bar as the input. When using the Xbox I just need to change the function on the soundbar to ARC.

The weird thing happening now, is that when using Netflix direct on the TV and setting the soundbar to ARC, the sound cuts out after 5 minutes and needs turning off and on again. Totally bizarre........ Why would sound from an app on the TV just cut out?!

I would rather not use the Netflix app via the Sky puck, as using the one on the TV means full Dolby Vision, which isn't possible via the puck.