Orthos error, HELP!

Associate
Joined
11 Jun 2006
Posts
1,569
NEW EDIT ***
My system runs stable on 210 FSB but i cant even get 215 fsb which is an 8% overclock! i have upped the voltage on my cpu from 1,500 to 1,650 and the next higher step that my mobo enables me is 1750 WHICH IS THE MAX setting so i am scared to go any higher,

Here is a screenshot i got with the error and my current setup,

Setup:
AMD 4000+
2GIG PC 3200 Corsair 3-3-3-8-11
GIGABYTE GA K8NXP-SLI
X850 XT PE (480/621)
POWER SUPPLY IMPORTANT CHECK PLEASE, (Thermaltake butterfly 480w)

I read a few posts ago about my 12v being crap and in the everested screenshot is that high for my PSU? is it dangerous?



Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
FATAL ERROR: Rounding was 0.4985428004, expected less than 0.4
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 4 seconds - 1 errors, 0 warnings.
Execution halted.

AMD 64 4000+

2583mhz
12multiplier
215 FSB
862HT LINK
Memory 161mhz

I did not get error when running 210FSB?
Also i cant set the memory 1xxmhz its done by 2/1 2/2 2/1.5 etc

Temps are low 40's, Voltage is 1,500 can i up it to 1,550? is it safe etc? HELP ME OC PLEASE!
 
Last edited:
it only lets me bump up voltage in increments of .25 so 1,500 goes 1,525 and so on, The other voltages i can increase are .1 .2 .3 i think or something like that northbridge voltage?
 
Type: Small FFTs - stress CPU Min: 8 Max: 64 InPlace: Yes Mem: 8 Time: 15
CPU: 2583MHz FSB: 215MHz [215MHz x 12.0 est.]
06/11/2007 18:15 Beginning a continuous self-test to check your computer.
Press Stop to end this test.
Test 1, 800000 Lucas-Lehmer iterations of M172031 using 8K FFT length.
FATAL ERROR: Resulting sum was 5825281817558422, expected: 5825281818606984
Hardware failure detected, consult stress.txt file.
Torture Test ran 0 minutes 26 seconds - 1 errors, 0 warnings.
Execution halted.

Upped the voltage from 1.500 to 1.550! ? it takes 26seconds, so should i up it more? temps are 48ish
 
Back
Top Bottom