im using:Gigabyte GA-965P-DS3(F5_bios)...Intel Core 2 Duo E6400...arctic freezer 7 pro...2GB Corsair DDR2 XMS2-6400C5 TwinX...7900 GTO...
ive got cpu host freq. to 400, multiplier at 7, (so 2800mhz)
memory multiplier to 2, (ram running at 800mhz @1:1 & 5,5,5,12)
pci express freq to 100
i have also fiddled around with voltage a tiny bit, i raised MCH by +0.1v,
& cpu was running at 1.325v, but i dropped it to 1.312v
now before i changed the voltages when i ran orthos on blend test, it would run for around 5 or 6 mins, then i would get an error , and the caps lock on my keyboard would start turning on and of until i exited orthos...
i checked the text file in the orthos dir. and it said this:
FATAL ERROR: Rounding was 0.5, expected less than 0.4
so i changed voltages, tried again, and same problem, what is it, and what should i do about it?
cheers
jon
(oh, and temps are reasonable, not great tho!)
ive got cpu host freq. to 400, multiplier at 7, (so 2800mhz)
memory multiplier to 2, (ram running at 800mhz @1:1 & 5,5,5,12)
pci express freq to 100
i have also fiddled around with voltage a tiny bit, i raised MCH by +0.1v,
& cpu was running at 1.325v, but i dropped it to 1.312v
now before i changed the voltages when i ran orthos on blend test, it would run for around 5 or 6 mins, then i would get an error , and the caps lock on my keyboard would start turning on and of until i exited orthos...
i checked the text file in the orthos dir. and it said this:
FATAL ERROR: Rounding was 0.5, expected less than 0.4
so i changed voltages, tried again, and same problem, what is it, and what should i do about it?
cheers
jon
(oh, and temps are reasonable, not great tho!)
