• Notice regarding image hosts and attachments. See here.

OS Reinstall Problems!

Associate
Joined
4 Feb 2009
Posts
212
Location
Milton Keynes
Hey all, i've got quite an annoying and worrying problem on my hands here, basically i had windows 7 installed, but got a virus, so reinstalled it, this was installed on my HDD, and also a spare copy on my SSD which i know you should disable defragmentation for, but i forgot to.

Once it was installed on the SSD, i deleted it from the HDD, so that copy became unusable, but i forgot about the defrag prevention.
Anyway, i flashed the bios to the latest version ( using the executable Liveupdate platform from MSI thinking its safe ) and it restarted the pc, then when i tried to load the OS, bluescreen, tried again, bluescreen, at the same point of windows startup, i don't know what i did but the next part is what really confuses me

When i attempt to install vista now (yes vista, as i've lost the windows 7 disk! :( ), using the disk, it decides that it dislikes the hard drives ive got in the computer, i don't know why but it asks for Drivers?!

so does anyone know whats up here, is it because ive flashed the bios, if that fails does it cause harm to a system ( it says its the version i flashed to when i check it in the Bios) and if not, how would i install vista again, id like to get the pc back working again soon, ive just completed mw3 on veteran and wanted to upload it all to youtube!

i will get a new copy of windows 7 soon as it is superior to vista, but as long as the pc gets back up ill be happy!



If it helps my hard drives are 2 Samsung Spinpoint F4's and an OCZ Vertex II

Cheers for any help in advance!

Dantoshou
 
oh!

Have you done a Bios reset following the update?

If you are using AHCI, defragmentation should be automatically disabled with an SSD.

Bios reset, how do i do that?! yes the Hard drives changed to IDE mode from AHCI, its just a shame ive now lost Windows 7 from that hard drive when i tried to install vista, okay so if i reinstall windows 7 it should work ?!
 
There will either be a jumper on the motherboard or a switch called cmos reset. For the jumper method you just move the plastic cap from pins 1-2 to 2-3 for a few seconds and then move back. If it is just two pins, short across them with a screw driver tip.

You could also remove the battery from the motherboard for a few minutes.

Then restart, go into the bios and set it up again.

alright, so i should do that, then reinstall windows? or should i install then reset the bios? ive never been so confused!
 
Video of the problem

heres a video of the problem im having, just so you guys know exactly whats happening, this is with a Genuine copy of Windows Vista 32-Bit.
 
Updated

Hi Guys, Have found the "CMOS Clear" button, assume that was the button i was asked to press, its reset the bios, but im still having problems, Have tried Windows 7 Disk, didn't register with the computer and also tried booting from a hard drive with Windows 7 already on it.

The message that comes up each time is

Reboot and Select proper Boot device
or Insert Boot Media in selected Boot device and press a key.

Basically it wouldn't work with any disks or hard drives, except the Windows vista 32 bit i have, which won't allow me to install.

What do i do now guys?!

P.S. the motherboard has 4 blue lights coming on im not sure if thats a sign of something bad, but when i had all the ram installed at one point, the pc kept restarting itself randomly, its not doing that anymore and i can boot to bios etc.

Whats my next move?!:mad:
 
IMG00001-20111110-1757.jpg



This is an image of the problem, the DVD of windows 7 and the hard drive with it installed on both showed this message, but the vista disk did not.
 
Back
Top Bottom