overclock attempt 2

NoobieOCer · 23 Nov 2007 at 15:56

defults:
preocessor: E6420 @ 2.13Ghz
Mobo: fatal1ty fp-in9 SLI
Ram: 2GB 800Mhz 5-5-5-17 arcording to cpuz
FSB: 266Mhz
multiplyier: 8
voltage: 1.35v

overclocked to 2.96Ghz with voltage of 1.4v in bios.

when i overclock it a bit bmore to 3Ghz it freezes when i run orthos. so i thougt it would be more stable if i increased voltage a bit more but i found the speedfan 4.33 to read 1.33v when the bios said 1.4v which one should i trust. and what voltage limit should i have, the guide said 20% increase that makes it 1.6V but i not sure.

NoobieOCer · 23 Nov 2007 at 16:04

ledbythereaper said:
1.4Vcore's a bit high isnt it? I've got my E6300 @3.2Ghz with vcore at 1.3, take a screenie of your CPU-Z screen, also is that the new fatality board? The nForce 650 one?

i dont know its my m8s and cpuz dont work properly on it, it missing drivers or something

NoobieOCer · 23 Nov 2007 at 16:11

ledbythereaper said:
Aye that mobo isn't a very good overclocker so don't expect much.

yes but the question is should i trust the bios of speed fan core voltages???? and what should i limit myself to

NoobieOCer · 23 Nov 2007 at 16:13

downloaded newer version works now

NoobieOCer · 23 Nov 2007 at 16:18

ledbythereaper said:
1.4Vcore's a bit high isnt it? I've got my E6300 @3.2Ghz with vcore at 1.3, take a screenie of your CPU-Z screen, also is that the new fatality board? The nForce 650 one?

on cpuz the main board chip set is nforce 650i SLI SPP

NoobieOCer · 23 Nov 2007 at 16:31

so how much voltage should i limitr myself!!!! and should i trust bios or speed fan and cpuz

NoobieOCer · 23 Nov 2007 at 16:47

ledbythereaper said:
1.4 should be your limit on air, and go on bios, SpeedFan says my vCore is 3.4V

do u mean 1.34v?? 3.4v is crazy