Overclock, but need memory help

naudiz · 24 Apr 2007 at 22:31

Hey there, first post but I've been reading the forums for quite a while. I've been looking at overclocking my PC recently, and for some reason windows insists that my memory is running at 400Mhz when it should be running at 800Mhz, however the BIOS reads it at 800Mhz. Specs below, any help would be greatfully appreciated, even if I am being a noob about it

Intel Core2Duo E6300 @ stock speed (1.86Ghz)
Gigabyte GA 956P DS3 motherboard
GeIL 2Gb PC6400 DDR2 RAM @ 800Mhz (Reads at 400Mhz in windows)
Arctic Cooling Freezer 7 Pro

Naudiz

naudiz · 24 Apr 2007 at 23:45

Ah I thought so, someone mentioned it but I just wanted to check, overclocked it now to 1.96Ghz, but it has upped the voltage from what I can gather, will that be doing any damage to the processor? I thought with an E6300 would go futher without having to up the voltage to it

Naudiz

naudiz · 25 Apr 2007 at 12:55

Quick update, had it running at 1.9Ghz which is all it would take, 3dmark06 score of 8000, gaming on it all night, booted it up this morning and it wouldn't start, so I had to reset the CMOS again... :/

Naud

naudiz · 25 Apr 2007 at 13:57

Ok ta will give that a go, any idea what the default voltage is on an E6300?

Naud

naudiz · 25 Apr 2007 at 14:30

Awesome thanks for the quick response, will try again this evening limiting the voltage and will see how it goes and will post results here in case anyone is interested

Naud

naudiz · 25 Apr 2007 at 18:15

Well that failed, got it to 2.0Ghz, ran Orphos to see how it handled and it bluescreened.

Naud

naudiz · 25 Apr 2007 at 18:29

Set it to 1.325, and it seemed ok. I wonder now if it could be that the RAM that didn't like the OC

Naud

naudiz · 26 Apr 2007 at 19:04

In case anyone is still watching, I got it to 2 gig stable, it was the RAM that wasn't liking it as it's value RAM, but there we go

naud

naudiz · 27 Apr 2007 at 09:43

Gah ok about to give up, was running stable all of yesterday, wouldn't boot this morning for some reason, anyone got any ideas?

naud

naudiz · 27 Apr 2007 at 12:16

The RAM is 800Mhz, not sure about running memory unlinked, overclocking is pretty new to me. As for voltages I was running 1.325 for the CPU I think, and auto for the rest. Thing I don't get it why did it run ok, then not boot the mornign after?

naud