Overclock questions cpu & ram

[mejobloggs]

I have an i5 750 at stable overclock of 3.7ghz

Enough for me, not wanting to go further

Question 1:
Can I turn any of these back on now that I have a stable OC?

- C1E
- C3/C6
- CPU EIST


Question 2:
Would it possible to be able to get to say.... CL 7 without too much effort?

My ram is currently running at 1560mhz, 1.6v
CL: 8
tRCD: 8
tRP: 8
tRAS: 24
tRFC: 88
CR: 2T

It's rated at the same CL timings as above, but 1600mhz. 1.6v

I've never really looked at tightning ram timing before, not sure how easy it is to get working settings?

Do all the ram timing numbers relate to each other? E.g if I change one, then I have to change others to match?

 

[ScratchFive]

answer 1:
yes but it may cause instability as C1E changes the Vcore and EIST chnages the CPU multi higher than the locked value (21). You will probably have to increase Vcore to compensate.

answer 2:
you will have to try, if it works then sure! haha your not going to do any damage putting them too low, just make sure you know how to clear your CMOS. whether you will be successful depends on how lucky you are with your unit.

A few of the timings directly depend on others, I cant remember off hand which ones, but if you leave all but the ones you mentioned above on auto you will be fine if I remember correctly.

hope this helps