Overclock stability

[il Conte]

Guys,

Was wondering whether you could offer any advice on my overclock.

I'm running E6600 on P5W DH Deluxe with 2gb OCZ reaper 8500.
Chip is running at 3.10ghz with ram running at over 1000mhz.

Overclock is perfectly stable when i'm watching a film, surfing the net etc but runs into problems when i'm multitasking- e.g. running a backup and playing around with some music, basically when i'm doing more than one thing at once. Basically the pc will just reboot itself.

I've upped my vcore to 1.35v and tried to run orthos cpu and ram stress test but it fails out straight out away and says there is a hardware fault.

Any ideas?

Thanks

 

[mp260767]

you got the memory voltage set within its acceptable limits ?

any chance you can use the memory divider to run it under 1000.

up the vcore a bit more, keep an eye on the temperature as u do.

 

[il Conte]

memory is set to 2.3v- as specified by ocz. will try upping the vcore and report back.

thx