Associate
- Joined
- 8 Mar 2011
- Posts
- 27
- Location
- essex
Hi guys.
Can some advise me on this.
i7-2600k
sabertooth p67
2x4gig sheiled ram
800w psu
gtx 470/260
Ok ive tried an over clock at 4.5ghz and just cant get it stable. Windows loads but just will not run prime95. BCLK/PEG Frequency set to 100.0. Vcore ive had upto 1.350v and still not stable.
I got the ump with it in the end and then tried 4.4ghz. BCLK/PEG Frequency set to 100.0 and Vcore started at 1.25v and kept upping till got prime to test, eventually on 3.40v. I found any lower Vcore prime would not run. After running test i got fails but no errors so i upped Vcore 3.45-3.50 but still i keep getting failiers on prime.
i dont really want to increase Vcore much more as i hear this aint good so why am i keep getting errors?
am i doing somthing wrong here or will this set up not overclock that high
Thanks
Dave
Can some advise me on this.
i7-2600k
sabertooth p67
2x4gig sheiled ram
800w psu
gtx 470/260
Ok ive tried an over clock at 4.5ghz and just cant get it stable. Windows loads but just will not run prime95. BCLK/PEG Frequency set to 100.0. Vcore ive had upto 1.350v and still not stable.
I got the ump with it in the end and then tried 4.4ghz. BCLK/PEG Frequency set to 100.0 and Vcore started at 1.25v and kept upping till got prime to test, eventually on 3.40v. I found any lower Vcore prime would not run. After running test i got fails but no errors so i upped Vcore 3.45-3.50 but still i keep getting failiers on prime.
i dont really want to increase Vcore much more as i hear this aint good so why am i keep getting errors?
am i doing somthing wrong here or will this set up not overclock that high
Thanks
Dave