Overclocked bundle problem..wont start up need help.

[Matson]

I recieved my overclockers bundle today its the....Krypton Z77 660i" Intel Core i5 3570K 3.40GHz @ 4.40GHz DDR3 Ivybridge Overclocked Bundle.

Connected everything up heatsink, fans, connectors. Turned on the pc and it turns on for 2 seconds then turns off. turns on again for 2 seconds then turns off and just repeats... The fans are spinning and i can hear things starting but it just keeps doing this over and over. Any help? could it be the internal connector cables..the ones that are tiny that all connect next to each other i think there for the front panel module. power led, power switch, reset switch, hd, activity, speak ect or are those just for the leds? There the small ones where you get orange/white blue/white connecters ect.
and wouldnt actually cause this issue im having?

 

[Matson]

Have you fitted the motherboard standoffs?

You have the 20/24 pin and 4/8 pin power connectors connected to the motherboard?

Yeah the stand offs are there and both of those are connected.

 

[Matson]

How can i rest it outside the system since it will need all the connectors attatched and the wires arnt that long for some of them. i tryed resetting the cmos that didnt make any difference. Im worried that maybe the MB or cpu has gone?

 

[Matson]

Is it this http://www.overclockers.co.uk/showproduct.php?prodid=BU-001-GI&groupid=43&catid=2384&subcat=2288 ?

It sounds like the ram is in the wrong slots, the instructions with that board give incorrect ram fitting instructions as I found out on a build yesterday.

Move the ram to the other two slots.

Are you sure because the ram was already in the board from when overclockers tested it.