overclocking 10th gen rig

spit051261 · 8 Aug 2020 at 22:31

Here is my OC rig .
Got the board and CPU from here .
The Apex works quite well and was able to run CPU just over 57 and my 4000 Cl15-16-16 2T Ram @ 4800 Cl 14-14-14 1T.
Got quite a good score on Cinebench R15 (3166)

Toothy1911 · 8 Aug 2020 at 22:41

Few details missing here. Which 10th gen CPU? 57 multiplier with 100mhz base? if so, 5.7Ghz is good going.
Are you using phase change cooling? What volts was this at?

spit051261 · 8 Aug 2020 at 23:18

I can't find the 3166 so this will have to do.
Using an EXC 800 chiller BTW.
Volts a bit high but had the temps to deal with it.
All the info you need is below

Toothy1911 · 8 Aug 2020 at 23:20

Image is too blurry to read for me.

spit051261 · 8 Aug 2020 at 23:24

cant you load full resolution ?

spit051261 · 8 Aug 2020 at 23:25

I can't upload the image
You should be able to click on it and load full resolution ?
https://ibb.co/pWZQWgG

clone · 9 Aug 2020 at 22:00

Lol here's me thinking my 10700k @ 4,8ghz 1.85v was good

spit051261 · 10 Aug 2020 at 12:08

Pretty fast eh

Jumper118 · 14 Aug 2020 at 19:49

pretty nice temps for 1.6v

spit051261 · 14 Aug 2020 at 22:16

I've just changed the coolant to anti freeze because this chiller can go to 20 below ambient .
So far I have got it to -5 liquid temp .
The earlier run was just water so a bit hotter.
When i get home , whack the air con on and give it another go .
Hoping to get close to 3200.
See if it will get closer to 58 as well .
This is direct die so it all helps