overclocking 3800x2

utajoker · 16 Jun 2006 at 15:35

hey

i just started to oc my 3800 x2,

never done anything like this before so i read the guide and it saysput ** multiplier to 10 then up the fsb, thenup the multiplyer later

my multiplyer only goes up to 10

so should i drop to 5 then do the fsb step?

quick reply plz

thx

joker

utajoker · 16 Jun 2006 at 15:40

it retail but i have freezer 64 on it

btw have asus a8n sli Deluxe board

EDIT i put premium instead of deluxe

utajoker · 16 Jun 2006 at 16:48

oks i hit 240 fsb at 10xmulti

245 gets to windows then restarts

vcore is at 1.4

what i do now?

up the vcore?

thx

joker
xx

utajoker · 16 Jun 2006 at 17:03

any1 please?

Edit i uped vcore and continueing on, but is there a max i **** put my vcore up to. so nothing frys

thx

utajoker · 16 Jun 2006 at 17:54

ok got fsb to 250 (2.5ghz )

runing prime95 and 32mb superpi

cpu is at 52C and mobo is at 39C
too warm?

now that i at this what my next step?

my mem at 333 should i put that to 400? and what should i do with the ht multiplier, leave at 4X?

edit also any way i can get anything more out of it?
thx

joker
xx

utajoker · 16 Jun 2006 at 18:48

come on peeps

any1? help

utajoker · 16 Jun 2006 at 19:05

vcore is at 1.5
250fsb
4x HT

mem frequency is at 208
mem timings as of cpuz:

2.5
3
3
5
10
2
16

COOLING

P180 i have my 2 hdds in the top hdd rack, thin i should move them to the botttom were psu is kept so i get better flow to mobo ? will this help temps any?

2 120mm ambers (full speed) and the 3 fans that come with p180 ( all on low)
zalman ZM-NB47J on northbridge but had to take of a few if the fin things so gfx would fit

Edit i have TOLEDO core jus so u no, the top clockers all seem to be manchester bar the odd 1

utajoker · 16 Jun 2006 at 19:25

ram is 1gb Corsair XMS3200C2PT

if i drop the voltage a little will that make a big diff to temps? i not gonna go any higher at this temp (52C load)

also should i try set memory to 1T?

Edit got volts to 1.475 ant 2.5ghz
what should i do with mem at 2T?
thx

joker
xx

utajoker · 16 Jun 2006 at 19:59

i didnt mess with the memory timings cos i dont actually no how they work i jus did fsb an vcore

the momory volts is set to auto and i cant get the volts below 1.475 reboots when windows loads password screen

i will put memory to 1T

and try for 2 3 3 5 timings (tho no clue what these numbers mean

)

will get back to u

joker
xx

utajoker · 16 Jun 2006 at 20:19

oks think i done my first overclock

did superpi in 35 seconds, at stock it did it at 39, this big improvement ?
check picture

clicky

thx for help from everyone i will also post in the 3800x thread
i will prime 95 over nite eto make sure it good

joker
xx

utajoker · 17 Jun 2006 at 12:26

grr stupid windows update

decided to run prime95 while i went out to stress it and bout 5 mins after i left i think windows update restarted my machine :/

:/ will run tonite tho