overclocking help needed

clayer

clayer

clayer

Associate
Joined
11 Mar 2012
Posts
335
Location
portsmouth
st overclock
i7 4930k rampage iv black edition

TeamGroup Xtreem LV 16GB (4x4GB) DDR3 PC3-20800C10 2600MHz

crossfire r9 290x watercooled

ax 1200w 1x360 rad 2x240 rad 1x120 rad /twin d5 res.

cosmos 2 ultra 2x256 samsung pro/raid 0 2t hdd 240ssd
ok ive set multiplier to 4.3 and x.m.p i could not find my ram size of 2600 the closest was 2666 so ive just used xmp which only gives me 2133.

i tested for an hour with aida 64 and gamed for a usual evening with no errors.

max voltage in aida64 was 1.344v max temp 56 c.

if i up the multiplier to 45 do i need to adjust anything else and how do i get my ram to its level of 2600.


thanks in advance.
 
You cant really do 2600 on X79 as the dividers don't allow it. You can of course get 2666mhz working by tuning the RAM timings accordingly or go 2400 with again a tuned profile.

If you up the multi you may well need to up the Vcore, VTT and VCCSA to get it stable. Memory volts are VTT and VCCSA if your trying to get improved memory clocks stable.
 
hi 8 pack
need some help in setting up ram to 2666

currently sat at 4.3 24/7 with overclock im happy with that atm would like to get ram running at its spec .

never done anything with ram before apart from selecting xmp.

10,12,12,31 1t added 1.65v (tried these settings)
i tried to do it myself and had a nightmare getting pc to boot had to clear the cmos and start again.
thanks
 
You must log in or register to reply here.
Back
Top Bottom