Overclocking..Help!

Gackt

Gackt

Gackt

Soldato
Joined
2 Apr 2007
Posts
6,402
Okay, so I while back I posted a thread about trying to overclock my E2200, but could never resolve the issue. I left it at stock and made do until today when I wanted to try and give it another go. And the problem is still there.
The problem being, everytime I try to overclock, it posts, and then restarts with the default settings.

Spec:

E2200 @ stock (2.2ghz)
GA-P35-DS3R
GeIL 2GB (2x1GB) DDR2 PC2-6400C4 800MHz Ultra Low Latency Dual Channel

Here's the settings I tried:

bios.jpg


I started with 210 as it was a small increment.

Am I doing something wrong here? I've disabled speedstep C1E etc.
 
Okay, so I cleared the CMOS, and after having issues getting it to post again, it did. I changed the multi to 6x and put 366mhz, but it gets to the memory test and fails. I tried 11x210, it gets to the memory test and fails, resetting back to defaults.

It seems that whenever I try to up the core clock, it says no, and reverts back to defaults. :/
 
You must log in or register to reply here.
Back
Top Bottom