overclocking my new build

[Spenty]

On my Gigabyte Z68AP-D3 all I did was set ram to 1600mhz and change CPU multiplier to 46, disabled any speed step options so processor constantly runs at 4.6ghz and left everything else on auto/standard settings.

 

[Dogfood09]

ok set my cpu to 4.6 , memory to 1600 , and it hung and gave me a BSOD 101 instantly

 

[jeff6475]

101 could be the PLL volts either increase a notch or decrease

 

[Dogfood09]

ok , i followed a guide off another site , re loaded fail safe settings , adjusted cpu to 4.6 , memory multiplier to 16 , v core to 1.370 and load line to level 5 , done a burn test on very high and..........success

 

[jeff6475]

nice 1