overclocking temps for opty 170
- Thread starter xirokx
- Start date
cpu is running at 37 deg
its weird but this system seems relaly slow....compared to my single core amd 3500
for example i am copying 3gig from my portable hdd to my hdd and its gonna take 54 mins lol
i have installed the amd dual core driver from the amd website....
am not really seeing much diff atm...
i got the mem timings of dfi street for my 2g ram.....and ran memtest for 10 hrs without any errors....
im running it at stock 2ghz....
any ideas?
its weird but this system seems relaly slow....compared to my single core amd 3500
for example i am copying 3gig from my portable hdd to my hdd and its gonna take 54 mins lol
i have installed the amd dual core driver from the amd website....
am not really seeing much diff atm...
i got the mem timings of dfi street for my 2g ram.....and ran memtest for 10 hrs without any errors....
im running it at stock 2ghz....
any ideas?
specs: opty 170, dfi nf4 sli dr, 2gig Gskill PC4000, zalman 9500led
im currently running at 2.5ghz primed it for 10 hrs and it was fine (yeap ran two prime test simultaneously)....ran memtest for 10hrs without any errors etc...
however when loaded cpu at below settings cpu temp is 50 deg and PWIM (what is this btw) was at 52deg and was in RED on smart guardian so this cant be safe?
that said my settings are as follows:
FSB - 250
LDT - x4
CPU/FSB Ratio - x10
Vcore - AUTO (what should I set this to) without frying the cpu
LDTv - 1.30 (can i increase this) all the above if yes to what?
CHPv - 1.6 (can i increase this)
vDIMM - 2.6 (can i increase this)
DRAM Frequency Set - 200 (DRAM/FSB:1:1) ( should I change the RAM divider- if yes to what?)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3.0
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 04 Bus Clocks
Row Cycle time (Trc) - 07 Bus Clocks
Row refresh cyc time (Trfc) - 14 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - 01
DRAM Bank Interleave - Enabled
DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 7
DRAM Data Drive Strength - Level 3
Max Async Latency - 8.0ns
DRAM Response Time - Normal
Read Preamble Time - 5.0ns
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)
help would be appreciated....
thanks in advance...
cheers!
im currently running at 2.5ghz primed it for 10 hrs and it was fine (yeap ran two prime test simultaneously)....ran memtest for 10hrs without any errors etc...
however when loaded cpu at below settings cpu temp is 50 deg and PWIM (what is this btw) was at 52deg and was in RED on smart guardian so this cant be safe?
that said my settings are as follows:
FSB - 250
LDT - x4
CPU/FSB Ratio - x10
Vcore - AUTO (what should I set this to) without frying the cpu
LDTv - 1.30 (can i increase this) all the above if yes to what?
CHPv - 1.6 (can i increase this)
vDIMM - 2.6 (can i increase this)
DRAM Frequency Set - 200 (DRAM/FSB:1:1) ( should I change the RAM divider- if yes to what?)
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3.0
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 04 Bus Clocks
Row Cycle time (Trc) - 07 Bus Clocks
Row refresh cyc time (Trfc) - 14 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - 3120 Cycles
Write CAS Latency (Twcl) - 01
DRAM Bank Interleave - Enabled
DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Level 7
DRAM Data Drive Strength - Level 3
Max Async Latency - 8.0ns
DRAM Response Time - Normal
Read Preamble Time - 5.0ns
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)
help would be appreciated....
thanks in advance...
cheers!