overclocking

ichabod crane · 21 Jun 2006 at 11:13

ok well i started overclocking my 3700 again this mornin. i am currently at 2.8ghz, with HT at 3 and Memory at 200 (lowest i can go) its been prime stable so far. now im not sure what to do with the divider now 2.8 is pretty quick and stable but the memory is going very slow. Super pi 1m has gone from 38s at stock to 46s at 2.8, can i up the divider? but what to?

edit: its at 1.55volts

ichabod crane · 21 Jun 2006 at 11:26

ok 2.8 just failed. so i have dropped the multi down to 9 as 10 wouldnt boot

still un sure on the divider tho

ichabod crane · 21 Jun 2006 at 11:29

thanks will try that now. when testing do you blend test CPU and RAM or just the CPU?

yes at mo i have a 2 x 512 and a 256. should i remove the 256? (its in there for battlefield

that is something i made on samurize using MBM5

ichabod crane · 21 Jun 2006 at 12:09

thanks hex, i am at that point right now

it is super pi stable, what is a better program to test with??
stress prime is rubbish. and what volts are you using through yours?? im at 1.625 at the moment

ichabod crane · 21 Jun 2006 at 12:16

sound high to me to. may knock them back a bit 1.55. cant get 2.8 stable just wont doit. gonna knock it back to 2.7 and leave it there

ichabod crane · 21 Jun 2006 at 16:19

yeh i know cpu z says 1.4 but its at 1.55 in bios. im stable at 2.7 now

245 x 11, HT 4, DDR 266. prime stable super pi stable

ichabod crane · 21 Jun 2006 at 17:40

cool and quite is off, MBM5 says 1.55volts cpu still says 1.4 ah well.
my psu is a tagan so very reliable

plus its BF2 stable but removing that 256 has brought back the massive memory lag i used to get its so annoyin just gonna have to get 2gig