I have read the threads on overclocking etc but I cant seem to get above 2.5Ghz
I have just upgraded to:
E2200
P35C DS3R
2Gb OCZ PC6400
I have tried Bios's F4, F9 & F10
I turned off all the bios settings as per the overclocking thread
I have set most things to manual & put in the correct settings
Set the required voltages to +0.1 & my ram to +0.3
230 FSB seems to be the max I can push it no matter what I set the multiplier to. With 11x it works but wont do 240x11 and with 9x it works but wont do 240x9, the max I con do is about 230x... I have manually set the PCi Express to 100Mhz and made sure I use dividers on my ram so I have no idea why the fsb wont push above this. I have even tried upping the fsb voltage another +1, after doing this it gets to windows then blue screens a stop error & reboots. The stop error's too quick to read. I have tried even with the CPU up to 1.45v but still get the same thing
I'm a noob to this so any help would be greatly appreciated
I have just upgraded to:
E2200
P35C DS3R
2Gb OCZ PC6400
I have tried Bios's F4, F9 & F10
I turned off all the bios settings as per the overclocking thread
I have set most things to manual & put in the correct settings
Set the required voltages to +0.1 & my ram to +0.3
230 FSB seems to be the max I can push it no matter what I set the multiplier to. With 11x it works but wont do 240x11 and with 9x it works but wont do 240x9, the max I con do is about 230x... I have manually set the PCi Express to 100Mhz and made sure I use dividers on my ram so I have no idea why the fsb wont push above this. I have even tried upping the fsb voltage another +1, after doing this it gets to windows then blue screens a stop error & reboots. The stop error's too quick to read. I have tried even with the CPU up to 1.45v but still get the same thing
I'm a noob to this so any help would be greatly appreciated