P35C-DS3R PC Health error

bluesouljah · 1 Jul 2007 at 19:53

Hi,

I have a P35C-DS3R with an E6600 and 2Gig of OCZ PC2-6400C4 Dual Channel Platinum Revision 2 XTC Series. I have put the Ram and CPU FSB to 1:1 and managed to up the FSB to 356 which equalled 3204mhz. It seemed fairly happy with that and I also upped the vcore to 1.4 and the DDR2 overvoltage by 0.3. When I go into the PC Health status page it has fail against the DDR2 voltage. Has anyone had similar problems or know how to resolve it?

Cheers,

Blue.

Alex UK · 1 Jul 2007 at 19:59

Try lowering the DDR2 overvoltage?

dan1987 · 1 Jul 2007 at 20:08

I have that board as well and mine has said that from the start and I have had no problems with it, I upped the ram voltage by 0.4 as my ram is designed to run at 2.2v.

bluesouljah · 1 Jul 2007 at 20:29

I've reset the setting so its now not clocked and its reporting okay. Maybe I have to tinker with the overvoltage a bit?

dan1987 · 1 Jul 2007 at 21:11

I noticed that 0.3 and 0.4 were written in pink in the voltage table not white like 0.1 and 0.2 so maybe thats what causes it to say fail, but if your ram is specified at that voltage I cant see it doing any harm.

Cob · 1 Jul 2007 at 21:24

Ignore the 'Fail' warning.

ns400r · 1 Jul 2007 at 21:48

Ingnore the warning message and pink colour.

DDR2 default spec voltage should be 1.8v (DDR2-553) but most higher spec memory needs 2.1v, and if you set +0.30v your over the default figure, and that is why the warning and pink colour.