P500, can't get RGB to work

Samhfx · 6 Apr 2021 at 18:51

Finally built my pc and when I booted the RGB on my fans don't seem to work. I think I messed up somewhere, where do I plug these cables to get my rgb to work?

https://gyazo.com/d19390b736a9ab0d3021b131888cca4b
https://gyazo.com/7dcce012c88cc3af58f291ce7a210c4d

Samhfx · 6 Apr 2021 at 20:34

Kurgen said:
the female connector goes onto the motherboard (check manual) or if your case has a controller on to that

i checked manual i'm so confused lol. would you mind pointing out where in the mobo i need to plug it in, please

Samhfx · 6 Apr 2021 at 22:09

chroniclard said:
What motherboard have you got? There should be a rgb connector, its 4 pins, check your manual for location.

As I said above, I checked my manual. I'm either completely stupid or I'm blind.

MSI Tomahawk x570.

This is the only place i could find and it doesnt work

https://imgur.com/YJwFUGm

Samhfx · 6 Apr 2021 at 22:59

chroniclard said:
Tried the one next to it?

it won't fit, the cable has 3 holes and it's solid between the hole. and it the mobo has 4 pins. it wouldn't fit?

Samhfx · 7 Apr 2021 at 13:04

Kurgen said:
The Jrainbow you have tried looks to be correct (and 5v). have you tried the other Jrainbow at the opposite end of the motherboard, and i assume you have tried to enable the RGB in bios and /or MSI software

I fixed it. I'm so dumb, amongst the bunch of cables there was a sata cable which needed to be connected to the psu.

Samhfx · 7 Apr 2021 at 17:53

Kurgen said:
you shouldnt need a SATA cable, its gets the power from the header. the SATA cable would normally used if your controlling the RGB from the case

No idea then lol. Having the sata plugged in won't do any harm right?