P9X79 PRO problem HELP

Adam_101 · 28 Nov 2012 at 18:09

Hello guys,

So I just got the above motherboard with 3820, and had OCUK update the BIOS for me.

Plugged everything in and no boot, just the reset switch comes on and the little light above the TPU switch. and a continuous beep beep beep beep...noise.

please help!

P9X79 PRO
3820
16GB Kingston quad channel ram
850 psu
670 msi graphics

if you need any more info please let me know!!

Thank you,

Adam_101 · 28 Nov 2012 at 19:03

anyone??

Bacon? · 28 Nov 2012 at 19:12

What PSU is it? Make and model please.
Also is the RAM and CPU cooler seated properly?

Make sure the 4/8 pin CPU connector is connected and same goes for 24 pin ATX cable.

Adam_101 · 28 Nov 2012 at 19:20

hello thank you so much for replying. PSU is XFX PRO 850.

I have checked this connection and all connected.

Adam_101 · 28 Nov 2012 at 19:21

the reset light and the light next to it is on - on the mobo but nothing else spinning or coming on

trickynickyuk · 28 Nov 2012 at 21:22

Check memory is in properly

RJC · 28 Nov 2012 at 21:24

trickynickyuk said:
Check memory is in properly

And in the correct slots, some boards are fussy in what slots the memory is in unless all slots are used.

Also try a CMOS reset - only quickly read the thread you might of already done this.

Adam_101 · 29 Nov 2012 at 11:38

Thank you all very much for your help. ~PC now would not even boot up at all, even after checking all you suggested. Sadly had to send it back.