PA 160 Will it fit in a V1000

The Asgard · 18 Feb 2006 at 09:24

Hi,
Anyone know if the PA160 will fit in the front bottom compartment without any real mods. Thinking of using the intake fan to drive the rad and was wondering what was involved?

Yewen · 18 Feb 2006 at 12:21

Can you get me the dimentions of the PA160 and ill see if a peice of cardboard will go in

The Asgard · 18 Feb 2006 at 12:23

you are a star m8

Overall dimensions HxWxD = 214x166x50mm (90mm inc shroud)..

Yewen · 18 Feb 2006 at 12:28

Do you want that to fit in the bottom where the cages go, as in replacing it?

Just need to make sure

The Asgard · 18 Feb 2006 at 13:10

yes m8 I think so

Yewen · 18 Feb 2006 at 13:11

Ok I will get you a picture in a minute

Just gonna have some grub!

The Asgard · 18 Feb 2006 at 13:18

That was fast!

Really struggling to decide on a rad that will fit the V1000 that will give me some decent cooling with little modfications. At the moment my mind is going round in circles. I have a Koolance PC3-725 on order but I am thinking about cancelling it and doing it myself. So many options.

Very much appreciate your efforts m8.

Should I be looking at this case for my water cooling? just like the look of it.

Yewen · 18 Feb 2006 at 13:20

Well it can be done, im running a reserator so dont really count!

But you can also get the rad mounted on the outside at the back, in the cd rom drive bay area or at the top with some cutting action there.

Getting you the dimensions now, side of case is off but cant find a ruler/tape measure!!!

Yewen · 18 Feb 2006 at 13:45

Here you go, just for a start, and I forgot the get the depth so give me a moment

Remember these were all done with a wooden 30cm ruler, but are quite a good guide im guessing!

19cm deep aswell

The Asgard · 18 Feb 2006 at 14:03

Sweet m8. Many thanks for your efforts, very very useful

Yewen · 18 Feb 2006 at 14:09

If you need any other dimensions just post it up and ill get the ruler out