Parts required

MowyTone · 18 Sep 2015 at 08:18

Trying to track down some parts as I'm pretty sure I'll end up needing them. I'm trying not to get caught out when fitting the new engine so trying to cover all angles.

I've looked at the hose clamps and some of them are not great. So I'm trying to find a shop I can drop into to get them. All I'm able to find atm is online shops.

These are the ones I've found listed on a site so might as well get them all for the sake of it. Halfords stock something similar to the first one but they are 12.5 mm wide.

Hose Clip 11-25mm x 8mm
Zero Hose Clip 38-57mm x 8mm
Hose Clip 44-63mm x 8mm

Any ideas where I can get these from?

Yaayuh! · 18 Sep 2015 at 09:36

Tried Screwfix?

http://www.screwfix.com/c/screws-nails-fixings/hose-clips/cat7290003

Fireskull · 18 Sep 2015 at 10:14

Yeah just try screwfix or B&Q locally.

Or if you want to order online: http://www.autosiliconehoses.com/silicone-hose-shop/hose-clips-clamps.html

MowyTone · 18 Sep 2015 at 11:08

Screwfix seem to do a few but not the same min and max sizes, plus the widths are off.

B&Q don't stock anything close to what I'm after. Problem is I dont know what I can and can't get away with in this kind of thing

wazza300 · 18 Sep 2015 at 11:12

Some regular jubilee cllamps will do,at any good diy shop

Fireskull · 18 Sep 2015 at 11:25

Dont worry about the sizes being off, just get a close as possible, they all tighten up to be way under anyway.