Parvum Systems Project Magnus

Uncle Petey said:
I think I've pretty much given up trying to work out how all that links together :D
Click to expand...

Haha yeah from photos alone that's probably pretty impossible to work out. Maybe it'll become more clear when the coolant is in. But probably not.

BoonMonkey said:
I genuinely love this build. Looking forward to seeing the final product! :D
Click to expand...

Thanks dude

Roady said:
Even more amazing, those reservoirs are incredible!

Can't wait to see the finished build, still rather mystified about the 'extra' GPU?! :p
Click to expand...

Yeah super happy with them, being glass they feel worlds apart from other reservoirs.

The GPU at the top is a weird on. It will connect to the same loop as the GPUs bellow but will pair up with the raid card water block above it and connect via the rear.

joelk2 said:
Good work chaps.

Just out of interest what breed of dog is that?
Click to expand...

Thanks Joel; the dog bread is a Shih Tzu!

hakank68 said:
those monsoon kits look really great
Click to expand...

Really awesome little bit of kit. I hope they sell the parts individually however as some bits a lot of people will already own.

Berkerk said:
Looks part Ewok to me.
Click to expand...

Ahah pretty much!
 
Just a quick question on the S1 case, do you think 2 240mm rads could stand side by side with each other in the front of the case if the front was modded to allow for mounting it?

I had a quick look at the case and its 275mm wide and I randomly picked a radiator and it is 135mm wide so theoretically 2 of them could fit in the front?

Thank you.
 
GiraffePencils said:
I am loving this every time I see it, Quick question though.
I would assume those lovely res would not be put into a consumer product?
Well, I'm assuming they'd be extra :p
Click to expand...

Thanks dude. Well we for sure want to look at selling a reservoir that will fit really well into our range of cases. We will either consider making these our self or having them made based on our design. We are very well connected with some of the bigger water cooling companies so either way it will be correctly tested and safe before these go on sale.

ash_hart said:
One dose not simply have the words to describe this.... epic build mate.
Click to expand...

Thanks Ash!

Confused said:
Just caught up from where I last saw it at page 3 - looking absolutely fantastic!
Click to expand...

Ah glad you are still here! Thanks for reading :)

Something Else said:
Just a quick question on the S1 case, do you think 2 240mm rads could stand side by side with each other in the front of the case if the front was modded to allow for mounting it?

I had a quick look at the case and its 275mm wide and I randomly picked a radiator and it is 135mm wide so theoretically 2 of them could fit in the front?

Thank you.
Click to expand...

Yeah dude, yeah in theory that would work no problem. However it would cause a bunch of aesthetic issues. You wouldn't be able to keep the front shape as it is, the way the front panel covers the colored accents. You would also have to change the mid wall. The mid wall curves in such a way to wrap around the front radiator. If there was two you would probably either want to cut it short or try to run in between the two.

All things you could do but possibly not worth how much work it would take. I'd recommend for more rad power going with an extended version. 360mm in the bottom and a 240mm in the front. If you only wanted to use a single GPU like 8pack you can even do a 240mm front, 240mm top AND 360mm in the bottom. We will probably do a limited run of these at OCUK.

38194330.jpg
 
parvumsystems,

Love your work! Have tried emailing you at info@ but not had a reply so I guess your flat out busy at the moment!

I'm hoping to do a build using a parvum case soon, but i'd like to have the extended version (but with the 360 mounted at the top and the 240 at the front. No bottom rad). Would this be possible? Hoping to get the black/red colour scheme with possibly an Overclockers UK logo inlay set in the frame of the panel containing the window or on the front panel, if it's do-able as it would be quite small I imagine :)

Cheers,

Jim :)
 
Same here, I'm very interested in getting hold of a parvum s1.0. I have emailed the info@ address on your site a couple of times but not had a response.

I would be very interested in getting hold of the extended 8 pack version you just posted above, but similar to Jimbo, having the 360 in the roof as it looks like the one on the floor might obscure the bottom PCI-E slot? I have a sound card to fit in!
 
Last edited:
M1keMK said:
Same here, I'm very interested in getting hold of a parvum s1.0. I have emailed the info@ address on your site a couple of times but not had a response.

I would be very interested in getting hold of the extended 8 pack version you just posted above, but similar to Jimbo, having the 360 in the roof as it looks like the one on the floor might obscure the bottom PCI-E slot? I have a sound card to fit in!
Click to expand...

Yeah, I'm wanting to put 2 graphics cards in so need it up top instead :)
 
LIGHTING LOOKS AMAZING!

Sponsors/Support:
NOST1.png


It's 2014! We are still here and with one of my favorite bits! Lighting starts!

First we start with yet another break down. This time was to fit the final motherboard tray and fit the single LEDs:

306.jpg

307.jpg


Next we add the Phobya LEDs, 2 pin setup, so nice and simple:

308.jpg

311.jpg


Installing:

309.jpg

310.jpg

312.jpg

313.jpg

314.jpg


Installed into the case:

315.jpg

316.jpg


Connection terminal:

317.jpg

318.jpg


Honestly so stoked on how the white LEDs look in the XSPC blocks:

320.jpg

321.jpg


Chucked a LED strip in the bottom just to see how the res's look:

322.jpg

323.jpg

324.jpg

325.jpg

326.jpg


Until next time. Questions please?!
 
You want questions, I have one.

Can you come wire my build up? :D

This is incredible, have to agree with you the white LED's look awesome.
 
You must log in or register to reply here.
Back
Top Bottom