• Notice regarding image hosts and attachments. See here.

Pc build help needed!

Associate
Joined
3 Dec 2012
Posts
97
I started building my gaming pc that i got for christmas, but i have encountered a problem when plugging in the powerleads into the motherboad.
I am hoping someone has an idea on how to get around this problem.

Specs
Phantom 410
Seasonic 650w
Asus Maximus V Formula
Corsair Dominator Platinum 8GB
Core i5 3570k
1 TB Hard drive

The problem i have is on the Maximus V Formula that the EZ Plug is at the bottom of the motherboard and the motherboard is already a tight fit. So the EZ plug is hitting off the guard at the bottom of the case for the power supply stopping the plug from even going into the socket which is the first problem. The socket is about 50% covered by the power supply bracket.
My first instinct was to just cut off the part of the bracket that was covering the plug. But the actual power supply covers the plug as well.

I am hoping there is a simple solution around this rather than cutting and carving the case to make it fit? Can the motherboard do without the EZ plug? Or is it really important?

Or maybe the easiest option is just to buy a bigger case? Which i don't want as i think the Phantom 410 is one of the nicest cases available.

Here is a few pictures to try and explain my problem.

Sorry I unsure how to resize the images if they are too big.

AF40AD25-C30C-4179-A1DC-42E87E7D1618-28345-000019FB781EC2EC.jpg


5710CB2B-971F-456F-9B5B-9DD5C05FB122-28345-000019FB9895F217.jpg


Thanks for any help that anyone can provide me with.

Sam
 
Thanks guys for your help, just another thing. The fans that come with the case have a different connector to what is on my motherboard, I need the female end with 4 pins. Is there an adapter I can buy to change it? Or do I have to get new fans?
 
I tried that. The fan connectors don't physically fit, they kept falling off. The white connector shown above was the stock intel cooler fan head which fits perfectly which made me think all fans need changed to that connection as the black ones don't seem to fit.
 
So sorry, that link with the adapter you posted looks just like the thing i need to change over the connection. Do you have a link to the page where i can buy them, as there is 4 of those connections in total i would need 2? as the connector converts 2 fans to 1 plug?

Thank you so much for your help
 
As far as i am aware the fans are already connected to the fan controller, these fan heads go onto the motherboard. I read this also on another forum because i was trying to figure out where the fan controller power lead went.
 
Yes all the fan controller headers are used up. Just realising that the fans connected to the fan controller headers have that 3 pin connection that are needed for the motherboard. So its the fan controller that is giving out the wrong connection for the fans to be connected to the motherboard.
Can i just unplug the fans from the fan controller and plug them directly into the motherboard and bypass the controller as a temporary measure?
 
Thanks for all your help. I shall give this a go tomorrow and start everything up. Do all fans come with a standard connection such as the 3 pin?
 
I understand it now, thanks for that link RJC, so the 4 spare headers coming from the fan controller are for extra fans! Duh stupid me. Atleast now i understand! Only if the instructions explained this it would make life much simplier lol. Thanks for your patience.
 
Back
Top Bottom