PC Build - Need a quick go-over!

[Artirev]

Upgrading to a new computer in a couple days, found all the parts on OCUK and just wanted to know if there's gonna be any clashes between parts.

I wasn't sure if the CPU cooler would fit snug in the Sabertooth board (That big plastic plate, would it get in the way?) for one thing.

Also, I run 2 monitors, would I be fine plugging one into the HDMI port on the graphics card and the other into the HDMI port on the Motherboard?

Case: Corsair obsidian 650D - http://www.overclockers.co.uk/showproduct.php?prodid=CA-036-CS
Motherboard: ASUS Sabertooth Z77 - http://www.overclockers.co.uk/showproduct.php?prodid=MB-512-AS
CPU: Intel i7 3770k (Needed for video rendering, otherwise I would've gone with the i5) - http://www.overclockers.co.uk/showproduct.php?prodid=CP-403-IN
GPU: Gigabyte GTX670 - http://www.overclockers.co.uk/showproduct.php?prodid=GX-095-GI
CPU Cooler: Arctic i30 - http://www.overclockers.co.uk/showproduct.php?prodid=HS-041-AR
RAM: Corsair Vengeance 16gb Low profile (2x8GB) - http://www.overclockers.co.uk/showproduct.php?prodid=MY-347-CS
PSU Corsair HX 850W ATX Modular PSU - http://www.overclockers.co.uk/showproduct.php?prodid=CA-019-CS (Extra power for overclocking and in case I fancied getting more bits in the future)
HDD: Seagate Barracuda 7200RPM 1TB SATA 6Gb/s 64MB Cache - OEM-http://www.overclockers.co.uk/showproduct.php?prodid=HD-257-SE
SSD: Crucial RealSSD M4 128GB 2.5" SATA 6Gb/s - http://www.overclockers.co.uk/showproduct.php?prodid=HD-009-CR
Optical Drive: LG GH24NS90 24x DVD±RW SATA ReWriter - http://www.overclockers.co.uk/showproduct.php?prodid=CD-090-LG

Thanks

 

[Artirev]

Right, thanks for the points there!

So, dropping the PSU to a 750W, and I'll take a look at the 2 coolers mentioned!

 

[Artirev]

you could save some money going for the ud3h rather than the sabretooth
i'd rather get the cm hyper612s than the i30
drop the psu to 750w, 850 is overkill. 750w is sufficient even if you want to sli your 670
sammy 830 > crucial m4

http://www.overclockers.co.uk/showproduct.php?prodid=HD-146-SA&tool=3

That the 830 you mentioned? I noticed there were a couple on the site, one was out of stock and this comes with some Norton dealy.

 

[Artirev]

Please do a build log with pretty pics! The system you intend to build looks really nice

Thanks for the advice, i think i'm going for the Cooler master CPU cooler then

And I certainly will, looking forward to getting everything myself!

 

[Artirev]

Also you cannot plug one HDMI into the graphics card and another into the motherboard, all display connectors will have to be plugged into the GTX 670.

Right. The situation was, I'm using a couple year old monitor that has a VGA output, and I've got a wee adapter to convert it to HDMI so I was planning on using that if I could.

I'm assuming I can use the http://www.overclockers.co.uk/showproduct.php?prodid=CB-016-OK to connect my monitor to the DVI-I slot on the 670?

 

[Artirev]

You might not need that cable because the GTX 670 might come with an adapter for VGA to DVI.

Had a look at an unboxing, and from the looks of it it just has the molex-6/8pin adapters.

Thanks for the advice!