PC is bluescreening every 12 hours or so

pinki104 · 7 Dec 2012 at 20:51

I has been BSOD for a while but i cannot figure out what the problem is, i know its a hardware problem but there is no error codes because windows 8 no longer uses the traditional BSOD log it just had a simple there was a problem message.

Operating System: Windows 8 Pro
Ram: 16gb Corsair Vengence (used to do it on my old ram too)
Cpu: i7 2600k no overclock
gpu: gtx 580
psu: 1000w Corsair
MB: Asus p8p67 Pro

wazza300 · 7 Dec 2012 at 20:54

Are you using x.m.p for your memory? And tried with 1.08-1.1v vccio voltage?

pinki104 · 7 Dec 2012 at 21:00

Vccio is currently auto and at 1.056 atm I will high and try it

Everything is on auto atm

CPU volatage is hovering around 1.08 atm

wazza300 · 7 Dec 2012 at 21:07

X.m.p sets up memory speed/timings/voltages for you,its either dram or vccio voltage imo

pinki104 · 7 Dec 2012 at 21:11

i cudnt find XMP setting option so im not sure but i will try it with the 1.08 volt for vccio and see how it goes

wazza300 · 7 Dec 2012 at 21:31

Your memory might not support it,check on dram voltage aswell you might need a bit more

pinki104 · 9 Dec 2012 at 21:37

Dram is 1.8v. And Vccio is 1.1 but its stil doing it

kthula666 · 10 Dec 2012 at 03:55

Maybe try the BSOD section on windows 8 forums they can walk you through testing routines to narrow down the fault. I had a problem with windows 7 and used the windows 7 forums to fix mine.

dave_beast · 10 Dec 2012 at 04:03

Download this http://www.nirsoft.net/utils/blue_screen_view.html and post the report in here, then we can see what's causing it and work from there.

Buchanan0204 · 10 Dec 2012 at 04:41

dave_beast said:
Download this http://www.nirsoft.net/utils/blue_screen_view.html and post the report in here, then we can see what's causing it and work from there.

Exactly... Don't just assume its memory related. BSV is very good and will point you in the right direction.

pinki104 · 10 Dec 2012 at 06:11

This is one from yesterday

Code:

==================================================
Dump File         : 120912-21593-01.dmp
Crash Time        : 09/12/2012 20:07:25
Bug Check String  : 
Bug Check Code    : 0x00000124
Parameter 1       : 00000000`00000000
Parameter 2       : fffffa80`0f70b028
Parameter 3       : 00000000`be200000
Parameter 4       : 00000000`0005110a
Caused By Driver  : hal.dll
Caused By Address : hal.dll+2d965
File Description  : 
Product Name      : 
Company           : 
File Version      : 
Processor         : x64
Crash Address     : ntoskrnl.exe+7a740
Stack Address 1   : 
Stack Address 2   : 
Stack Address 3   : 
Computer Name     : 
Full Path         : C:\WINDOWS\Minidump\120912-21593-01.dmp
Processors Count  : 8
Major Version     : 15
Minor Version     : 9200
Dump File Size    : 301,840
==================================================

Here is one i got 2 days ago

Code:

==================================================
Dump File         : 120812-33390-01.dmp
Crash Time        : 08/12/2012 20:38:35
Bug Check String  : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code    : 0x00000050
Parameter 1       : fffff6fb`40000000
Parameter 2       : 00000000`00000000
Parameter 3       : 00000000`00000000
Parameter 4       : 00000000`00000006
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7a740
File Description  : 
Product Name      : 
Company           : 
File Version      : 
Processor         : x64
Crash Address     : ntoskrnl.exe+7a740
Stack Address 1   : 
Stack Address 2   : 
Stack Address 3   : 
Computer Name     : 
Full Path         : C:\WINDOWS\Minidump\120812-33390-01.dmp
Processors Count  : 8
Major Version     : 15
Minor Version     : 9200
Dump File Size    : 301,896
==================================================

PaulyD · 10 Dec 2012 at 10:16

First could be not enough voltage to CPU or not high enough VTT voltage.

2nd is usually RAM related, so I would say bump up the VTT voltage some more (Sounds like its VCCIO on your board)

pinki104 · 15 Dec 2012 at 11:28

think i managed to fix the first 2 errors as i havent had them since but now i get a memory management blue screen 5+ times everyday.

Code:

==================================================
Dump File         : 121512-26562-01.dmp
Crash Time        : 15/12/2012 11:23:03
Bug Check String  : MEMORY_MANAGEMENT
Bug Check Code    : 0x0000001a
Parameter 1       : 00000000`00041793
Parameter 2       : fffff680`0004b668
Parameter 3       : 00000000`00000002
Parameter 4       : 00000000`00000001
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+7b340
File Description  : 
Product Name      : 
Company           : 
File Version      : 
Processor         : x64
Crash Address     : ntoskrnl.exe+7b340
Stack Address 1   : 
Stack Address 2   : 
Stack Address 3   : 
Computer Name     : 
Full Path         : C:\WINDOWS\Minidump\121512-26562-01.dmp
Processors Count  : 8
Major Version     : 15
Minor Version     : 9200
Dump File Size    : 301,880
==================================================

mmj_uk · 15 Dec 2012 at 11:44

pinki104 said:
Dram is 1.8v. And Vccio is 1.1 but its stil doing it

Hope that's an error, running higher than 1.65V can damage the processor.

I would try unning your memory at 1333mhz for a while, have a feeling you have an unstable stick.