• Notice regarding image hosts and attachments. See here.

PC just died.. :(

I tried resetting the CMOS before the restart, and it still goes straight to Bootlock.

I can't honestly see why a floppy should make any difference, as it's reading the file and flashing the BIOS form the USB and the CD, it's just not staying there on re-boot!?!

This board is only 11 months old, so it'll be going back. What would cause the BIOS chip to stop working/become corrupted!?! I'd expect to get more than a year out of a mobo, especially as i'm not over-clocking anything!?!
 
Have you any other memory you could chuck in the rig?
Everything a computer does has to go through the memory and this obviously includes a BIOS flash/recovery.
Sounds like the memory could be ropey! If you have more than 1 stick of RAM try doing a BIOS recovery with each stick on it's own.
 
I've just tried taking out the memory one stick at a time (2x1GB), but if i remove either stick i get no graphics output!?!?! Work that one out.... :confused:
 
I've just tried taking out the memory one stick at a time (2x1GB), but if i remove either stick i get no graphics output!?!?! Work that one out.... :confused:

Sounds like both your memory sticks could be faulty?!?!
Do you not have access to any 100% confirmed working memory to try out in the rig?

I take it you have tried each memory stick in all 4 of the memory sockets??
 
Sounds like both your memory sticks could be faulty?!?!
Do you not have access to any 100% confirmed working memory to try out in the rig?

I take it you have tried each memory stick in all 4 of the memory sockets??

No access to any other memory, my other pc is much older and uses a different type. :(

I've only used the sticks in A1 and B1. I thought you could only use A2 and B2 if the other two slots were populated!?!
 
Well, apparently i have some bent pins in the socket on my mobo, so the warranty is void... Great!

How the damn thing's been running fine for almost a year with bent pins i'll never know!?!?!

Can anyone recommend a replacement board? I won't be going with the P5K Deluxe this time, in fact i'm not too sure if i'll be going with Asus at all. I know it's subjective, but what board would you go with?

It has to be a 775 board, as i have a Q6600. Wi-Fi isn't needed. Rig is mostly for gaming and photo editing.

If i go with a different board, will it affect my RAID, or OS!?!

Thanks for the help ;)
 
The Bent pins would have happened after the pc was taken to bits, they wouldn’t have caused your problem as the board would have simply not worked from the start. I smell bull xxxx!!
 
The Bent pins would have happened after the pc was taken to bits, they wouldn’t have caused your problem as the board would have simply not worked from the start. I smell bull xxxx!!

That was my thought, and as i think it unlikely that pins could get bent by removing the CPU, i have questions... Unfortunately they are questions that can't be put to anyone, as they would become accusations with absolutely no proof... Hence i have written the board off. Obviously i won't be using this particular vendor again, or recommending them to anyone else.

now, back to the board hunting... Any recommendations?
 
Sorry to hear about your Asus woes beano :(

I'd recommend the Abit IP35 Pro, I have one with my Q6600 @ 3ghz on stock volts, its also rock solid, easy to setup and overclock if you wanted to & its on offer this weekend :)
 
Sorry to hear about your Asus woes beano :(

I'd recommend the Abit IP35 Pro, I have one with my Q6600 @ 3ghz on stock volts, its also rock solid, easy to setup and overclock if you wanted to & its on offer this weekend :)

Cheers D.M

I won't be able to get one this weekend, probably gonna be a week or two unfortunately, but i'll definitely look at the IP35 so thanks for that. ;)
 
Back
Top Bottom