PC no signal

cjenks22

cjenks22

cjenks22

Associate
Joined
16 Aug 2011
Posts
146
Can any one help me ? i haven't used my pc for 3 months now due to this issue and today i have some spare time on my hands , maybe i can fix it with some of your guys input.

When i turn pc on i get no signal on monitor
Tried using different HDMI cables

Im just staring at this now , what next?

1418ae0.jpg
 
If available, switch to the on-board GPU. Change the display output type in the BIOS to the iGPU, save and restart (remembering to swap the DVI cable to the correct socket)
 
I have removed my graphics card and i am trying for the life of me to connect to onboard graphics, but non of my connectors seem to be fitting ? i have a hdmi slot on my motherboard but for some reason it has a plastic cover connected?

Pics below

1zbrn6e.jpg


149shu8.jpg
 
pull the plastic plug/cover out of the hdmi socket and plug hdmi cable into it

if you do get a display,update the board to the very latest bios then try your graphic card again,remember to plug the monitor diplay/hdmi back into the gpu
 
you might need the latest uefi bios to get the card to work im not sure,but its a faff to flash back to award bios once you've updated to the uefi

(tried the card in the next pcie slot down if you have one?)

EDIT: didn't read that the card worked fine before so it aint bios issue
 
Last edited:
Take the GPU out and look for damage, particularly around the power cables. A 560 Ti should not need a BIOS update, especially as it used to work. Do you have another video card you can try?

On further thought, what PSU is that? If it's a cheap no-name Chinese job, I'd be very wary of trusting another GPU to it.
 
You must log in or register to reply here.
Back
Top Bottom