PC showing no display, help please.

y2w2003

y2w2003

y2w2003

Associate
Joined
22 Nov 2005
Posts
227
Hi. yesterday i let orthos run on my system after getting a a Tuniq Tower cooler. Basically i left it alone for about an hour then i came back to see how it was going and the screen wouldn't show. So i turned the thing off and put it back on and all the fans, hard drive, cd drives, GPU was on but no picture. I tried reseting the thing by taking out the battery but no luck. I'm getting really worried now what do you guys think is the problem? Your help will be really apreciated.

P.S I turned off the PSU and waited upto an hour and put it back on but there was no difference, still got the same thing.
 
Last edited:
Please do not take personal offence, but probably not the best idea to run orthos or similar and leave a machine unattended after fitting a new cooler - the idea being to test if anything is wrong, and if you're not there you can't intervene should something like this happen!

When you boot up, are there any beeps? if so, what pattern? Have you reset your CMOS? try this first :)
 
There are no beeps and I have reset the CMOS with no avail.

I understand i should probably watch over it while running Orthos but does it not usually stop if it fails? Also i had been using it for a good 5-6 hours before hand with no problem.
 
Try taking out the ram as well and see if you get any beeps then. Also make sure that you have audio output i.e. the cables are connected. I did this a few weeks ago and thought I've got no sound until I realised that the pins were not connected to the cable. lol.
 
You must log in or register to reply here.
Back
Top Bottom