PC wont boot, POST 32

Soldato
Joined
29 Dec 2014
Posts
2,576
Location
The "North"
Hi everyone, I have been having some trouble with my PC recently. I have been assembling it for a while and today I booted it when the liquid cooling was all fitted however when the GPU is installed is only reaches the POST 32 stage.

It worked before the cooling was installed so I'm wondering if the GPU has broken due to the installation of the waterblock.

The hardware in question is a GTX 1080 and an EVGA Micro 2 X99

Any help would be greatly appreciated as I'm not sure if I've knacked my PC :(
 
I would just check you dont have any bent pins on your cpu socket.
Reseat your memory, 32 is: CPU post-memory initialization is started.
Leave it for a good 15 mins. Do you have a lot of RAM?
So last night after hours of irritation I removed all the loop, fitted a H50 and reseated all the memory modules and it posted up to 50 where it counted so I assume that means it is ready to boot. I'll re-fit the stock cooler on the GPU to see if it boots when the GPU is fitted :)
 
Back
Top Bottom