Pcie 4.0 cable for phanteks shift 2

Wing-Man

Wing-Man

Wing-Man

Permabanned
Joined
30 Dec 2021
Posts
3,642
Location
Yorkshire
Is there a pcie 4.0 riser cable compatible with a shift 2.

When looking at the sockt top down. With the lock to the bottom the cable comes out of the left od the sock. Every cable I can find is standard what the cable coming out of the right.

This is not good with the shift as the riser sits flat the back of the motherboard tray.
Al get a photo latter to help explain
 
Haz123 said:
Just a quick question. Why do you need a pcie 4 cable ? 4090 is fine in pcie 3 but I understand the 6600xt is not ideal with pcie 3
Click to expand...

Ever time bios is reset the bios pick up a pcie 4.0 gpu and auto sets pcie 4.0 on the motherboard. This with a pcie 3.0 cable is not good. And I get lock ups and refuses to boot.

I have to strip the system and boot on my desk to change pcie to 3.0 in bios. This it's ok. But I still get a black screen every now and then in windows.

I'm just about to strip my system again... I'll add a photo of the cable now
 
If you look at the cable you can see it comes out the left and wraps round to go under the motherboard. The righthand side sits flat to the motherboard tray so I need one link the photo. I did some Googling and couldn't find anything but I will look up what you said.

20230209-114052.jpg
 
You must log in or register to reply here.
Back
Top Bottom