Phantek RGB Starter kit

Associate
Joined
8 Dec 2012
Posts
280
Hi all,

has anyone used this kit and able to say whether the cabling that comes with it allows you to put (for example) a strip at the top of the case and a strip at the bottom or can you only daisy chain them onto the end of the other one.

My basket at Overclockers UK:
Total: £23.89 (includes shipping: £9.90)​

or would i need to do it this way and get a strip that will go all the way around, 1m should be enough for a full circle around my s340 elite.

My basket at Overclockers UK:
Total: £27.64 (includes shipping: £8.70)​
 
You can do them as separate strips but they'd still need to join up somewhere, unless your RGB hub has additional sockets.

(you can even do them as separate strips & join them manually if you're comfortable soldering & have 18 AWG wire - they have 12V, and R/G/B channels)

Check the third picture in the store - You want that but longer?
 
I'm pretty sure the starter kit comes with an extension cable that will be long enough to allow a strip at the top and one at the bottom.
I had the same kit and did the same as what you want to do in my Phanteks P400s case
 
I ended up getting the corsair strips with node pro. Software is abit fiddly but ive managed to get it glowing nicely :)

I tried and failed with the Node Pro so ended up getting the Phanteks digital RGB starter set.
Like you I am too glowing nicely :)
 
We're going to need pics :D

just need a nice 11 series GPU now :p

yfFxD63.jpg

3onikKy.jpg
 
I know this topic is a bit old but I’ve been picking bits up for my new pc build.
In maplin I picked up this NZXT hue starter kit with box and two fans for £24. Worth it for that price.
 
Back
Top Bottom