Hello there im not sure if this is the correct to play this but i have the following cooler http://www.overclockers.co.uk/showpr...odid=HS-002-PT. ANd right underneath that coolers is my graphics card which is very close to the metal parts that hold the fans in place. So i have just wrapped celotape round the metal. Would this stop the graphics card from shorting out if it was ever to touch?
Phanteks cooler
- Thread starter Exe
- Start date
Had the very same problem.
I bent the parts of the spring that stick out back toward the cooler.
Put them in a vice, and use either a small hammer or a piece of wood and hit that with a larger hammer. They bend quite easily.
I also placed a piece of stiff plastic between the graphics card and the cooler. (Belt and braces.
)
I bent the parts of the spring that stick out back toward the cooler.
Put them in a vice, and use either a small hammer or a piece of wood and hit that with a larger hammer. They bend quite easily.
I also placed a piece of stiff plastic between the graphics card and the cooler. (Belt and braces.
)