** PHANTEKS EVOLV SHIFT-X & SHIFT - GET SHIFTY **

ChugNorris

ChugNorris

ChugNorris

OcUK Staff
Joined
26 Nov 2014
Posts
2,473
Location
Stoke
** PHANTEKS EVOLV SHIFT-X & SHIFT - GET SHIFTY **

YUjgpSE.png



You'll be happy to learn that the Phanteks Evolv Shift-X & Shift are finally available for preorder! Originally unveiled at CES as the Project 217, the Evolv Shift-X & Shift aim to offer an innovative set of features wrapped up inside a lovely aluminium and tempered glass chassis that wouldn't look out of place in your living room. Both are Mini-ITX form factor, but are aimed at different user requirements.

The Shift-X is the premium model, with support for 280mm radiators, 529mm VGA cards, SFX-L PSU's and up to 4 x 140mm fans (of which 2 are pre-installed). There's sufficient space for a watercooling setup with a pump mount included, and theres a reversible GPU bracket and PCI-E riser cable to allow you to mount the card whichever way you would prefer. There's space for up to 4 x 2.5" SSD's, and if you sacrifice the radiator spacing you can also install a pair of 3.5" HDD's. Finally, both vents are made from aluminium and feature dust filters to keep your system clean!

The Shift on the other hand is a more cost effective solution with a smaller footprint. Space for the radiator is lost, along with VGA card length, although you can still fit a 120mm AIO & and 350mm VGA card in there. The reversible GPU bracket & PCI-E riser cable are included though, along with a 140mm front fan. SFX-L PSU's are supported as standard, and whilst the vents are plastic, the rest of the case is the same aluminium and tempered glass used on the Shift-X.

Both models support RGB lighting as you can expect and are compatible with Asus Aura, Gigabyte RGB Fusion and MSI Mystic Light Sync as standard. Both Black & Gunmetal Grey are available, and stock is due to arrive near the end of August. I would preorder as there is a huge amount of interest around these cases.

I'm going to be honest, I absolutely love this case, the Shift-X in particular. I've been keen on it ever since it was announced and seeing it in the flesh has convinced me to make it my next build case. I've been thinking of putting my system under water for some time now and this case is the one I'm going to do it with, despite the wallet destroying move from X99 to Z270 alongside all the kit I'm going to have to buy! Good job I work here... :)


Phanteks Enthoo Evolv Shift X Mini-ITX Tempered Glass Case - Black @ £149.99 inc VAT



Premium Mini-ITX Enthoo Evolv Shift X in Black, Aluminium panels & tempered glass, Good watercooling support & 2 pre-installed fans, Space for 52 cm long graphics card & 280 mm radiator.



Only £149.99 inc VAT.

ORDER NOW


Phanteks Enthoo Evolv Shift X Mini-ITX Tempered Glass Case - Gunmetal Grey @ £149.99 inc VAT



Premium Mini-ITX Enthoo Evolv Shift X in Gunmetal Grey, Aluminium panels & tempered glass, Good watercooling support & 2 pre-installed fans, Space for 52 cm long graphics card & 280 mm radiator.



Only £149.99 inc VAT.

ORDER NOW


Phanteks Enthoo Evolv Shift Mini-ITX Tempered Glass Case - Black @ £104.99 inc VAT



Premium Mini-ITX Enthoo Evolve Shift in anthracite, Aluminium panels & tempered glass, Space for 35 cm long graphics cards.




Only £104.99 inc VAT.

ORDER NOW


Phanteks Enthoo Evolv Shift Mini-ITX Tempered Glass Case - Gunmetal Grey @ £104.99 inc VAT



Premium Mini-ITX Enthoo Evolve Shift in Gunmetal Grey, Aluminium panels & tempered glass, Space for 35 cm long graphics cards.



Only £104.99 inc VAT.

ORDER NOW
 
pastymuncher said:
What is the point of going with the compromises of a ITX board and then sticking it in a case such as this? At 470mm up to 650mm long it's massive and just seems to defeat the object in choosing a small form factor motherboard to begin with.
Click to expand...

snips86x said:
They're both mini-itx :(
Click to expand...

The point is to allow for the necessary space to allow for a watercooled system and full sized VGA card. Micro-ATX would have further increased the size and reduced the cooling potential.
 
FL630 said:
When are you expecting these in OCUK? I've made up my mind I'm going to get one but I'm not a fan of pre-ordering.

Going to transplant my NZXT Manta guts into it, might see a significant temp increase going from 280+240mm to 280 only, I'm not sure how the lower 120 would fit if I'm honest looking at pictures.
Click to expand...

End of August, barring any production issues.
 
FL630 said:
OCUK, is the case that you used for the video available to view at the shop? I'd like to take a look at the shift X before hitting order and I'm passing your fine store today and need to an excuse to spend money.
Click to expand...

Only just saw this unfortunately. Hopefully you managed to check one out.
 
jrodga2k5 said:
Indeed there is not, I'm going to have to revisit the idea as I bought some Phanteks strips but because I have an older ITX Board it doesn't have the RGB header required to use them so will pick up some different ones :)
Click to expand...

There is an RGB control button on the chassis itself. You won't get the depth of control that you do using Asus Aura etc, but it's still good enough for most :)
 
You must log in or register to reply here.
Back
Top Bottom