Phanteks Luke

xxtomox · 2 Dec 2015 at 10:35

Hi everyone trying to remove the front of my Phanteks Luxe case to remove all dust. I cant figure out how to remove it.

Any one know?

Bickaxe · 2 Dec 2015 at 11:02

Long nose pliers and pinch the plastic clips (3) in on each side and push through slightly.

Start at the bottom. When you've done that, you should be able to pull to front off.
Mind the LED cables, not much give on them once the front is off so just unclip them.

xxtomox · 2 Dec 2015 at 11:15

noticed those. very tight. Am I best using plyers?

Bickaxe · 2 Dec 2015 at 11:29

Yes, much easier than using your fingers. doesn't need much force though

P4Clock · 2 Dec 2015 at 11:37

grab the bottom of the front, man up and pull it off.

bioshockeruk · 2 Dec 2015 at 12:36

I have the case first slide the bottom fan filter out then grab the front from the bottom and pull firmly. Takes a bit of force but it will pop out. Once it is loose at the top there is two cabled to disconnect. One for led and one for fan. I can provide pics if you wish.